Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

John Deere X350 Specs

John Deere X350 Engine Specifications

Engine Make - Kawasaki
Engine Model Number - FS600V
Engine Type - Air-cooled, 4-stroke, V-twin, Vertical shaft, OHV
Max. power - 12.7 kW (17.0 hp) / 3600 rpm
Max. torque - 40.4 Nm (29.8 ft.lbs) / 2200 rpm
Cylinder liners - Cast iron
Bore - 73 mm (2.87 in)
Stroke - 72 mm (2.83 in)
Displacement - 603 cm2 (36.8 cu in.)
Cylinders - 2 (V-Twin)
Cycle - Four
Maximum speed - 3500 ± 100 rpm
Idle speed - 1500 ± 100 rpm
Cylinder compression - 4.5 kg/cm2 (64 psi) at 500 rpm
Fuel Capacity - 12.5 L (3.3 gal)
Fuel Filter - Replaceable paper element
Fuel Pump - Pulse
Fuel Delivery - Carburetor
Combustion chamber - Spherical
Carburetor - Internally vented with fuel shut-off solenoid
Oil capacity (litres) - 2.0 litres
Oil type - 4-stroke or an equivalent (SJ or higher class)
Recommended oil - SAE 10W-40, 10W-30
Air filter - Dual element
Lubrication system - High performance
Ignition - Electronic spark
Spark plug - NGK BPR4ES
Ignition Coil Air Gap - 0.25-0.40 mm (0.010-0.016 in)
Valve Clearance (Intake and Exhaust) (Cold) - 0.075-0.125 mm (0.003-0.005 in)
Spark Plug Gap - 0.75 mm (0.030 in)
Spark Plug Torque - 20 Nm (15 lb-ft)
Length, cm (in) - 48,4 (19.1)
Width, cm (in) - 43,4 (17.1)
Height, cm (in) - 37,7 (14.8)
Dry weight, kg (lb) - 36.7 (80.9)

John Deere X350 Transmission

Transmission Type - Hydrostatic
Transaxle - Kanzaki Tuff Torq K46
Number of Speeds - Variable Speed
Reduction Ratio - 21.53:1
Axle Torque (rated) Nm (ft. lbs.) - 177.7 (131)
Max. Tire Diameter mm (inch) - 457 (18)
Brake Capacity Nm (ft. lbs.) @ 350 N (79 lbs) - 253 (187)
Pump/Motor Displacement cc/rev - 7/10
Max. Input Speed rpm - 3,400
Axle Shaft Size mm (inch) - 19.05 (0.75)
Max. Static Weight on Axle kg (lbs.) - 306 (675)
Weight (dry) kg (lbs.) - 12.5 (27.6)
Brake Type - Wet Disc, internal
Gears - Heat Treated Powder Metal
Differential - Automotive Type Bevel Gears
Speed Control System - Hand Control External Friction Pack and Lever Available
Bypass Valve (Roll Release) - Std
Forward Speeds at Full Engine RPM - 0-8.9 km/h (0-5.5 mph)
Reverse Speeds at Full Engine RPM - 0-6.4 km/h (0-4.0 mph)

JD X350 Electrical System

Charging system - 13A or 20A charge coil (option)
Battery Type - 12 Volt
Cold Cranking Capacity - 340 Amps
Charge coil - 13 or 20 Amp
Starting Type - Electric Start
Starter - Bendix type

Tire Sizes

Front Tire Size - 15x6.00-6
Rear Tire Size - 20x10.00-8
Tire Inflation Pressure (Front) - 97 kPa (14 psi)
Tire Inflation Pressure (Rear) - 69 kPa (10 psi)

JD X350 Dimensions

Overall Height - 109 cm (43 in.)
Overall Width (without mower deck) - 104 cm (41 in.)
Length (Overall) - 173 cm (72 in.)
Machine Weights (Without mower deck) - 210 kg (464 lb.)

John Deere X350 Attachments

44 Inch Snow blower

Overall Length - 77.5 cm (30-1/2 in.)
Clearing Width - 1.1 m (43-1/4 in.)
Scraper Blade - Replaceable
Height to top of housing - 46 cm (18 in.)
Height to top of spout - 100 cm (40 in.)
Auger Speed - 110 rpm
Auger Diameter - 30.5 cm (12 in.)
Impeller Speed - 1060 rpm
Impeller Diameter - 35.5 cm (14 in.)
Lift Height (above ground level) - 10 cm (4 in.)
Lift Height (below ground level) - 5 cm (2 in.)
Discharge Chute Rotation - 200 Degrees
Net Weight - 82 kg (180 lb)

Accel Deep 42 Mower Deck

Type - Mid-mount
Cutting Width - 107 cm (42 in)
Blades-Rotary - 2
MulchControl Attachment - Optional
Mower Wheels - Adjustable
Blade Nut Torque - 88 Nm (65 lb-ft)
Cutting Height (Approximately) - 25-102 mm (1-4 in)
Deck Weight - 33 kg (73 lb)

Edge 42 Mulch Deck

Cutting Width - 107 cm (42 in)
Blades-Rotary - 2
MulchControl Attachment - Optional
Mower Wheels - Adjustable
Blade Nut Torque - 88 Nm (65 lb-ft)
Cutting Height (Approximately) - 25-102 mm (1-4 in)
Deck Weight - 42 kg (92 lb)

Accel Deep 48 Mower Deck

Type - Mid-mount
Cutting Width - 122 cm (48 in)
Blades-Rotary - 3
MulchControl Attachment - Optional
Mower Wheels - Adjustable
Blade Bolt Torque - 68 Nm (50 lb-ft)
Cutting Height (Approximately) - 25-102 mm (1-4 in)
Deck Weight - 60 kg (133 lb)

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________