Specifications, Service and Repair of Farm and Lawn Tractors

John Deere GX335 Tractor Specs

John Deere GX335 Engine Specifications

Engine Make - Kawasaki
Engine Model - FH601V
Cylinders - V-Twin
Engine Power, Rated, hp (kW) - 14.9 (20)
Compression - 9:1
Displacement, cm3 (cu in) - 675 (41.2)
Engine Bore - 75.2 mm (2.96 in.)
Engine Stroke - 76 mm (2.99 in.)
Cycle - Four
Cooling Type - Air
Oil Filter Replaceable - Full Flow Filter
Air Cleaner - Paper Element with Foam Precleaner
Spark Plug Gap - 0.75 mm (0.030 in.)
Spark Plug Torque - 15 Nm (11 lb-ft)
Valve Clearance (cold) - 0.075 - 0.125 mm (0.003 - 0.005 in.)
Voltage - 12 V
CCA - 500 amp
Reserve Capacity - 90 minutes
BCI Group Size - 51

John Deere GX-335 Tractor Drivetrain

Transmission Description - Tuff Torq K71
Transmission Type - hydrostatic
Gears - Infinite forward and reverse
Oil Filter - Replaceable Filter

Travel Speeds at Full Engine RPM

Forward - 0-11.3 km/h (0-7 mph)
Reverse - 0-6.4 km/h (0-4 mph)

JD GX335 Tractor PTO (Power take off)

Front PTO - Independent
PTO Clutch - Electric

Wheels and Steering

Drive Wheels - 2WD
Steering Configuration - Power Steering

Brakes

Brake Type - Internal Wet Disc

Hitch

Hitch Type - Sleeve hitch

Capacities

Fuel Tank - 15.1 L (4.0 gal)
Transmission Oil (including reservoir) - 4.7 L (5.0 qt)
Engine Oil (with filter) - 1.7 L (1.8 qt)
Engine Oil (without filter) - 1.6 L (1.7 qt)

John Deere GX335 Dimensions

Wheel Base 125 cm (49.25 in.)
Overall Height 111 cm (43.6 in.)
Overall Length 183.5 cm (72.25 in.)
Overall Width Rear Wheels in Narrow Position (without mower) 104.2 cm (41.0 in.)
Overall Width Rear Wheels in Wide Position (without mower) 106.2 cm (41.8 in.)

Weight

Net Weight (Without Mower or Fuel) - 303 kg (668 lb)

John Deere GX-335 Tire Size

Front Tire Size - 16x6.50-8
Rear Tire Size - 24x12-12
Inflation Front - 70-97 kPa (10-14 psi)
Inflation Rear - 56-70 kPa (8-10 psi)

48 Inch Mower Specs

Mower Type - Mulch, Bag or Side Discharge
Cutting Blades - 3
Mower Weight - 53 kg (117 lb)
Blade Bolt Torque - 68 Nm (50 lb-ft)
Cutting Width - 121.9 cm (48 in.)
Cutting Height (approximate) - 25 to 102 mm (1 to 4-in.)
Height Adjustment - 13 position, 6.35 mm (1/4 in.) increments

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________