________________________________________________________________________________

Massey Ferguson 285 Maintenance Data

Massey Ferguson 285 Maintenance Intervals

Every 10 Hours or Daily Inspection

Check the engine oil level. If the engine oil level is low, add fresh oil.

Check hydraulic/transmission fluid level. If the hydraulic/transmission fluid is too low, fill the required volume.

Checking primary/secondary air filter element. Change if required.

Check the coolant level in cooling system. If the coolant level is low, add it.

Check engine idle speed, steering, service brakes and hand brake. Repair any damage if required.

Oil And Filter Change

Every 200 hours

Engine oil change. Recommended motor oil: SAE 20, 20W. API service classification SE, SF, CC, CA. How much to add: Engine Oil Capacity - 10.0 qt (9.5 L). After installing a new filter, check that the engine oil level is correct.

Changing engine oil filter. Oil filter part number: 1447048M2, 1882916V91 (Element). Flush the filter housing before the filter element replacement procedure. When the filter is replaced, check the oil level. Add oil if required.

Engine air filter elements checking. Replace as required. Engine primary air filter part number: 1042216M92. Engine secondary air filter part number: 1039045M92.

Every 500 Hours

Replace steering filter element. Part number of hydraulic filter: 1039660M1 (Strainer). Check the steering oil level after installing a new filter element. Add oil if required. Steering Oil Capacity - 1.0 qt. (0.9 L). Steering Oil Type - Permatran.

Replace diesel fuel filter. Engine fuel filter part number: 836218V92. Check the correct operation of fuel injection pump.

Replace engine primary air filter element. Air filter part number - 1042216M92.

Replace engine secondary air filter element. Part number - 1039045M92.

Every 750 Hours

Transmission/hydraulic fluid change. Recommended fluid type: Permatran 821XL, SAE 10W-30, M-1129. How much is needed: Transmission/Hydraulic Oil Capacity - 8.5 gal (32.2 L). Add transmission/hydraulic oil to the upper mark on the dipstick.

Replacing hydraulic fluid filter. Hydraulic filter part number - 1053870M91/1060005M92. When the filter is replaced, check the transmission/hydraulic fluid level. If necessary, add it.

Front axle lubricant change. Front Axle Oil Type - Permatran.

Annual Maintenance

Massey Ferguson 285 replacement parts

Engine Primary Air Filter. Part Number: 1042216M92
Engine Secondary Air Filter Element. Part Number: 1039045M92
Engine Oil Filter. Part Number: 1447048M2, 1882916V91 (Element)
Engine Fuel Filter. Part Number: 836218V92
Hydraulic Filter. Part Number: 1053870M91/1060005M92
Steering Filter Element. Part Number: 1039660M1 (Strainer)

Change filter and engine oil. Check and clean the lubrication system.

Install a new engine air filter elements.

Change hydraulic/transmission oil.

Replace hydraulic filter.

Replace steering filter and steering oil.

Drain water from fuel tank, then change the fuel filter.

Clean oil cooler fins and radiator.

Flush the cooling system and add new coolant. Cooling System Capacity - 16.0 qt (15.1 L).

Inspect all hoses and clamps.

Check level of battery electrolyte.

Adjust engine valve clearance.

Check and adjust injection pump.