________________________________________________________________________________

Massey Ferguson 290 Maintenance Information

Massey Ferguson 290 Periodic Maintenance

Every Ten Hours or Daily Checking

Engine oil level checking procedure. If after checking the oil level is low, add it.

Transmission/hydraulic oil level checking. When the transmission/hydraulic fluid is low, fill the required volume.

Check engine air filters. Change if required.

Check radiator coolant level. If the coolant level is low, add it.

Check engine speed, steering system, service brakes and parking brake. If damages are found, repair it.

Oil Change And Filter Replacement

Every 250 hours

Changing engine oil. Recommended oil - SAE 10W-30, 15W-40, 20W-40. API service classification SE, SF, CC, CD. Engine oil capacity: 8.0 qt (7.6 L). After completing the filling procedure, check motor oil level.

Engine oil filter changing. Filter part number - 1447048M2. Before replacing, remove dirt from the filter housing. After installation, checking the oil level is recommended. If necessary, add oil.

Change engine fuel filter. Fuel filter element part number: 3405419V1. Check injection pump adjustments.

Clean engine primary air filter element. Change if necessary. Air filter part number - 3824035V1/1678294V1.

Service engine secondary air filter element. Replace as required. Part number - 3824036V1/1678295V1.

Every 500 Hours

Replace hydraulic/transmission oil. Recommended oil - Permatran 3, SAE 10W-30. Transmission/hydraulic fluid capacity: 11.0 gal (41.6). Fill with the new transmission/hydraulic fluid up to the upper notch on the dipstick.

Steering fluid filter replacement. Steering filter element part number: 1662566V1. After replacing the filter, check the steering oil level. Add fluid if necessary. Steering Oil Type - Permatran. Steering Oil Capacity - 1.2 qt (1.1 L).

Changing hydraulic filter element. Hydraulic filter part number: 1810694V92. When installation procedure is complete, check the transmission/hydraulic oil level. Add hydraulic oil if it is low.

Front axle fluid change. Front Axle Oil Type - Permatran.

Annual Maintenance

Massey Ferguson 290 replacement parts

Engine Primary Air Filter. Part Number: 3824035V1/1678294V1
Engine Secondary Air Filter Element. Part Number: 3824036V1/1678295V1
Engine Oil Filter. Part Number: 1447048M2
Engine Fuel Filter. Part Number: 3405419V1
Hydraulic Filter. Part Number: 1810694V92
Steering Filter Element. Part Number: 1662566V1

Change filter and engine oil. Service oil system components.

Change engine primary/secondary air filter elements.

Change transmission/hydraulic fluid.

Install a new hydraulic filter.

Replace steering filter element and add fresh oil to steering system.

Drain water from fuel tank and change fuel filters.

Clean radiator and oil cooler fins.

Drain, flush and refill cooling system. Cooling System Capacity - 15 qt (14.2 L).

Inspect all hoses and clamps.

Check battery charging.

Adjust engine valve clearance.

Inspect and adjust diesel fuel pump.