________________________________________________________________________________

Massey Ferguson 393 Maintenance Data

Massey Ferguson 393 Maintenance Intervals

Every Ten Hours or Daily Inspection

Engine oil level checking. If after checking the engine oil level is low, top it up.

Check transmission/hydraulic fluid level. When transmission/hydraulic oil is low, add recommended volume.

Check engine primary/secondary air filter. Install a new filter if required.

Check engine coolant level. If the coolant level is low, top it up.

Check engine idle speed, steering, service brakes and hand brake. Repair any damage if necessary.

Oil Change And Filter Replacement

Every 250 hours

Changing engine oil. Engine oil type - SAE 10W-30, 15W-30, 20W-20. API service classification SE, SF, CC, CD, SG. How much to fill: Engine Oil Capacity - 8 qt (7.5 L). After adding engine oil, check the level with a dipstick.

Replacing engine oil filter. Oil filter part number: 1447048M2. Before replacing, remove dirt from the filter housing. After replacing the filter, check the oil level. If after checking the oil level is low, add it.

Check cab air filter. Service as required. Cab air filter part number: 3478327V1/3614023V91.

Check engine primary air filter element. Clean if necessary. Air filter part number - 3595500V1/3595503V1.

Inspect engine secondary air filter element. Service as required. Part number - 3595501M1.

Replace hydraulic oil filter. Hydraulic filter part number - 3595175M1 (Spin-on), Lift Pump: 1687042V91, w/ Tubed End: 3771122V92. When installation is complete, check the transmission/hydraulic oil level. If after checking the transmission/hydraulic oil level is low, add it.

Every 500 Hours

Replace engine fuel filter. Engine fuel filter part number: 3405419V1. Check diesel fuel pump settings.

Change cab air filter. Cab air filter part number: 3478327V1/3614023V91.

Every 1000 hours

Change transmission/hydraulic fluid. Recommended transmission/hydraulic fluid type - Permatran 821XL, M1139, M1144, M1145, SAE 10W-30. How much is needed: Oil Capacity - w/ Spacer: 12.5 gal (47.4 L), w/o Spacer: 11.5 gal (43.4 L). After changing the transmission/hydraulic oil, check the level with a dipstick.

Change steering filter. Part number of steering filter element - 3800305V91. Check the steering fluid level after installing a new filter. Add steering fluid if it is low. Steering Oil Capacity - 1.27 qt (1.20 L). Steering Oil Type - Permatran.

Change front axle oil. Front Axle Oil Capacity - 1.3 gal (5.0 L), Front Hubs: 1.27 qt (1.21 L).

Annual Maintenance

Massey Ferguson 393 replacement parts

Engine Primary Air Filter. Part Number: 3595500V1/3595503V1
Engine Secondary Air Filter Element. Part Number: 3595501M1
Engine Oil Filter. Part Number: 1447048M2
Engine Fuel Filter. Part Number: 3405419V1
Hydraulic Filter. Part Number: 3595175M1 (Spin-on), 1687042V91 (Lift Pump), 3771122V92 (w/Tubed End)
Steering Filter Element. Part Number: 3800305V91
Cab Air Filter. Part Number: 3478327V1/3614023V91

Change engine oil and filter. Service oil system components.

Install a new engine primary/secondary air filter elements.

Change transmission/hydraulic oil.

Replace steering filter element and change steering oil.

Change hydraulic filter.

Replace the fuel filter, but drain water from fuel tank first.

Install a new cab air filter.

Clean oil cooler fins and radiator.

Flush the cooling system and refill with fresh coolant. Cooling System Capacity - 16 qt (15.5 L).

Check all hoses and clamps.

Check and service the battery.

Check engine valve clearance.

Check and adjust fuel injection nozzle.