________________________________________________________________________________

Massey Ferguson 390 Maintenance and Servicing

Massey Ferguson 390 Service Intervals

Every 10 Hours or Daily Checks

Motor oil level checking. If the oil level is too low, fill in new oil.

Check hydraulic/transmission oil level. If hydraulic/transmission oil is too low, fill in new oil.

Engine air filters check. Install a new filter elements if necessary.

Check radiator coolant level. If the coolant level is low, add it.

Check engine idling, steering system, parking brake and service brakes. Repair any damage if required.

Oil And Filter Change

Every 250 hours

Replace engine oil. Recommended oil type - SAE 10W-30, 15W-30, 20W-20. API service classification SE, SF, CC, CD, SG. Lubricating system capacity: 8 qt (7.5 L). After replacing the engine oil, check the level with a dipstick.

Replace engine oil filter. Engine oil filter part number: 1447048M2. When installing a new filter, flush the filter housing from dirt. After installation, checking the oil level is recommended. If required, add it.

Replace hydraulic filter. Hydraulic filter part number: 3595175M1 (Spin-on), 1687042V91 (Lift Pump), 3771122V92 (w/Tubed End). After installing a new filter, check the hydraulic/transmission oil. If required, add it.

Check cab air filter. Service as required. Cab air filter part number: 3478327V1/3614023V91.

Check engine primary air filter element. Clean if necessary. Air filter part number - 3595500V1/3595503V1.

Inspect engine secondary air filter element. Service as required. Part number - 3595501M1.

Every 500 Hours

Replace diesel fuel filter. Engine fuel filter part number: 3405419V1. Check the operation of fuel injection pump.

Replacing steering fluid filter. Steering filter element part number: 1662566V1. After installing a new filter, check the steering oil. Add oil if necessary. Steering Oil Type - Permatran. Steering Oil Capacity - 2.1 pt. (1.2 L).

Every 1000 hours

Change hydraulic/transmission oil. Transmission/hydraulic fluid type - Permatran 821XL, M1139, M1144, M1145, SAE 10W-30. System capacity: w/ Spacer: 12.5 gal (47.4 L), w/o Spacer: 11.5 gal (43.4 L). Add hydraulic/transmission fluid to the upper mark on the dipstick.

Front axle fluid change. Front Axle Oil Capacity - 1.3 gal (5.0 L), Front Hubs: 1.22 qt (1.20 L).

Yearly Maintenance

Massey Ferguson 390 replacement parts

Engine Primary Air Filter. Part Number: 3595500V1/3595503V1
Engine Secondary Air Filter Element. Part Number: 3595501M1
Engine Oil Filter. Part Number: 1447048M2
Engine Fuel Filter. Part Number: 3405419V1
Hydraulic Filter. Part Number: 3595175M1 (Spin-on), 1687042V91 (Lift Pump), 3771122V92 (w/Tubed End)
Steering Filter Element. Part Number: 1662566V1
Cab Air Filter. Part Number: 3478327V1/3614023V91

Change filter and engine oil. Check and clean the oil system.

Change engine primary/secondary air filter elements.

Change transmission/hydraulic oil.

Replace hydraulic filter.

Replace steering filter element and fill the steering system with fresh oil.

Drain water from fuel tank, then replace the fuel filter.

Install a new cab air filter.

Clean radiator and oil cooler fins.

Drain, flush and refill cooling system. Cooling System Capacity - 4 gal (15.1 L).

Inspect all clamps hoses and hoses.

Check battery electrolyte level.

Check and adjust valve clearance.

Inspect and adjust diesel injection pump.