________________________________________________________________________________

Case IH 1494 Tractor Technical Data

Case IH 1494 Engine Specs

Engine Model - Case AD4.55T
Engine Type - Diesel, Four stroke
Engine Power Rated, hp (kw) - 85,0 (63,5)
Rated Engine Speed, rpm - 2200
Compression Ratio - 16.0:1
Fuel Tank, gal (litres) - 35,9 (135,0)
Number of Cylinders - Four
Displacement, cu in (litres) - 219,0 (3,6)
Bore Size, in (mm) - 3,94 (100,0)
Stroke Size, in (mm) - 4,51 (114,0)
Aspiration - Turbocharged
Max. Torque - 218,0 lb-ft (296,0 Nm)
Torque Speed, rpm - 1600
Cooling System - Water cooled radiator
Oil Capacity, qts (litres) - 7,8 (7,4)
Coolant Capacity, qts (litres) - 15,0 (14,2)
Electrical Rating, Volts - 12
Charging system - Alternator
Alternator Rating, Amps - 45/65 (heavy duty)
Batteries Number - 1
Batteries Power, Ah - 96 / 128 (heavy duty)

Case IH 1494 Transmission

Standard Transmission - 12 Forward x 4 Reverse
Transmission Type - Synchromesh
Forward / Reverse Speeds - 12F / 4R
Maximum Speed Forward, mp/h (kp/h) - 16,8 (27,0)
Optional Transmission - Hydra-Shift, 12 Forward x 4 Reverse
Transmission Type - Partial power shift
Forward / Reverse Speeds - 12F / 4R
Oil Capacity, qts (litres) - 33,6 (31,8)

Case IH 1494 Power Take Off

PTO Horsepower, hp (kW) - 75,0 (55,9)
Power Take Off Speeds, rpm - 540/1000
PTO Type - Independent
PTO control - Manual

Case 1494 Hydraulic System and Hitch

Hydraulic System Type - Open Center
Hydraulic Pressure - 170,7 Bar (16,8 Mpa)
Steering Pressure - 127,7 Bar (12,0 Mpa)
Standard Pump Flow, gpm (Lpm) - 7,7 (29,1)
Steering Pump Flow, gpm (Lpm) - 7,66 (29,1)
Total Flow, gpm (Lpm) - 15,3 (57,9)
Standard Remote Valves - 1 to 3
3-Point Hitch - Category 2
Standard Lift Capacity 24 in / 610 mm, lb (kg) - 3210 (1456)
Standard Lift Capacity at ends, lb (kg) - 5366 (2435)
Max. Load on hitch, lb (kg) - 2992 (1360)

Mechanical

Drive Wheels - 2WD/4WD
Steering Wheels - Front Steer
Steering - Power
Brake Type - Disc Brakes
Disc - Single

Case 1494 Wheels and Tires

Front Tires (2WD) - 7.50-18 / 10.0-16
Front Tires (4WD) - 12.4-24
Rear Tires - 16.9-34 / 13.6-38
Front Tread (2WD), in (mm) - 56 to 80 (1420 to 2030)
Front Tread (4WD), in (mm) - 60 to 76 (1520 to 1930)
Rear Tread, in (mm) - 56 to 80 (1420 to 2030)

Case IH 1494 Dimensions and Weight

Wheel Base, in (mm) - 88,5 (2240)
Length, in (mm) - 147,5 (3740)
Height, in (mm) - 102,0 (2590)
Overall Width, in (mm) - 75,0 (1900)
Ground clearance (2WD), in (mm) - 16,5 (410)
Ground clearance (4WD), in (mm) - 14,0 (350)
Turning radius, in (mm) - 150,0 (3800)
Drawbar capacity, lb (kg) - 3000 (1360)
Front axle load (2WD), lb (kg) - 7000 (3175)
Front axle load (4WD), lb (kg) - 7500 (3403)
Rear axle load, lb (kg) - 10500 (4760)
Weight (2WD, Synchromesh), lb (kg) - 7380 (3348)
Weight (4WD, Synchromesh), lb (kg) - 8005 (3630)
Weight (2WD, Hydra-Shift), lb (kg) - 7660 (3475)
Weight (4WD, Hydra-Shift), lb (kg) - 8180 (3715)