________________________________________________________________________________

Case IH Magnum 210 Specs

Magnum 210 Engine Specifications

Engine Make - Case IH FPT
Engine Model - 6.7 L
Number of Cylinders - 6
Displacement, cu in (L) - 411 (6.7)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Advertised Engine Power, Rated, hp (kW) - 215 (158)
Maximum Engine Power, hp (kW) - 260 (191)
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - 45 (33)
Fuel Tank capacity, gal (L) - 105 (397)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - 15 (57)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged and air to air intercooler
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4A (Interim)
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - SCR w/ DEF
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - Viscous
Electrical System Rating, Volts - 12
Alternator Rating, Amps - Std 150; Opt 200

Case IH Magnum 210 Power Take-Off

PTO Horsepower, Standart / Optional Transmission, hp (kW) - 180 (134)
PTO Speeds, rpm - 540 / 1000
PTO operational Type (Independent; Live; Continuous) - Independent

Transmission

Manufacturer's Description - 19 Speed Full Powershift
Transmission Type - Full Powershift
Number of Forward / Reverse Speeds - 19F / 6R
Maximum Speed Forward, mph (kph) - 25 (40)
Creeper Range Available - Dealer install
Shuttle (Forward-Reverse) Available - Yes
Manufacturer's Description - 19 x 6 Full Powershift (19th Economy Gear)
Transmission Type - Full Powershift
Number of Forward / Reverse Speeds - 19F / 6R

Magnum 210 Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 118.3 (3005)
Front Tire Size orTrack Width, MFD/4WD or Track - 380/85 R34, R1
Rear Tire Size or Track Width - 480/80 R46, R1 Duals

Axles and Brakes

Final Drive Location and Description - Planetary / Inboard
Axle Output End, Flange or Bar - Bar
Axle Bar Diameter, in (mm) - 4.0 (102)
Suspended Front Axle Available - Yes / Option
Service Brake Type - Wet disc

Case IH Magnum 210 Hydraulics and Hitch

Hydraulic System Type - Pressure-flow compensating (PFC)
Main Hydraulic Pump Type - Variable Displacement
Implement Pump Flow, gpm (Lpm) - 35.7 (135)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 3 std; 4 or 5 opt.
3-Point Hitch Category - Category 2 / 3N
Draft Sensing or Lift Control - Electronic, lower link
Draft Link Ends Telescopic - Yes; quick coupler opt.
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 12,100 (5488)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 14,100 (6396)
Drawbar Description - Category 3, Swinging

Magnum 210 Dimensions and Weight

Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 234 (5944)
Height to Top of Cab, in (mm) - 126.2 (3206)
Height to Top of ROPS raised, in (mm) - No open ROPS
Overall Width, with standard wheels or tracks, in (mm) - 119 (3020) bar axle ends
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 21,500 (9750)
Weight, Total allowable, w/maximum ballast, lb (kg) - 25,243 (11450)