________________________________________________________________________________

Case IH Puma 165 Specs

Puma 165 Engine Specifications

Engine Make - Case IH FPT
Engine Model - 6.7 L
Number of Cylinders - 6
Displacement, cu in (L) - 411 (6.7)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Advertised Engine Power, Rated, hp (kW) - 165 (121)
Maximum Engine Power, hp (kW) - 210 (154)
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - 45 (33)
Fuel Tank capacity, gal (L) - 71 (270) + 16 (60) auxiliary
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - 12.7 (48)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged, air-to-air aftercooled
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - SCR w/ DEF
Cleanup Catalyst (CUC) - CUC standard
Diesel Oxidation Catalyst (DOC) - DOC standard
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - BorgWarner Visctronic std; Reversible opt.
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 150 Std / 200 Opt

Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 140 (104)
PTO Speeds, rpm - 540 / 1000 FPS; 1000 / 1000E CVT
PTO operational Type (Independent; Live; Continuous) - Independent

Case IH Puma 165 Transmission

Manufacturer's Description - 18 x 6 Full Powershift
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 18F / 6R
Maximum Speed Forward, mph (kph) - 25 (40)
Creeper Range Available - Optional 29F x 12R
Shuttle (Forward-Reverse) Available - Yes

Manufacturer's Description - 40 or 50 kph ECO CVT
Transmission Type - Continuously Variable (CVT)
Number of Forward / Reverse Speeds - Infinite, 2 ranges

Manufacturer's Description - 19 x 6 Hi-Speed Gear, 30 mph (50kph)
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 19F / 6R

Puma 165 Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 107.6 (2734) std; 109.8 (2789) Susp. Axle
Front Tire Size, 2WD - No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track - 380/85 (14.9) R30, R1W
Rear Tire Size or Track Width - 460/85 (18.4) R42, R1W

Axles and Brakes

Final Drive Location and Description - Planetary / Inboard
Axle Output End, Flange or Bar - Flange std; bar opt.
Axle Bar Diameter, in (mm) - 3.62 (92)
Suspended Front Axle Available - Optional
Service Brake Type - Wet disc

Case IH Puma 165 Hydraulic System

Hydraulic System Type - Closed Center, Pressure Flow Compensated (PFC)
Main Hydraulic Pump Type - Variable Displacement
Implement Pump Flow, gpm (Lpm) - 29.8 (113) FPS; 33 (125) CVT
Optional Pump Flow, gpm (Lpm) - 37 (140) CVT only
Number of Standard Remote Valves - 3 std; 4th & 5th opt.

3-Point Hitch

3-Point Hitch Category - Category 2
Optional Hitch Category - Category 2 / 3
Draft Sensing or Lift Control - Electronic Draft Control (EDC)
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 8,050 (3651)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 9,250 (4195)
Standard Lift Capacity at lift pin, lb (kg) - 12,185 (5527)
Drawbar Description - Swinging

Puma 165 Dimensions and Weight

Height to Top of Cab, in (mm) - 118.3 (3005)
Height to Top of ROPS raised, in (mm) - No open ROPS
Overall Width, with standard wheels or tracks, in (mm) - 98 or 112 (2489 or 2845) bar axle ends
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 13,900 (6305) FPS; 14,500 (6577) CVT
Weight, Total allowable, w/maximum ballast, lb (kg) - 24,251 (11000)