________________________________________________________________________________

Case IH Farmall 75N Specs

Farmall 75N Engine Specifications

Engine Make - Case IH FPT
Engine Model - 3.2 L
Number of Cylinders - 4
Displacement, cu in (L) - 195 (3.2)
Engine Bore, in (mm) - 3.90 (99)
Engine Stroke, in (mm) - 4.095 (104)
Advertised Engine Power, Rated, hp (kW) - 76 (56.7)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2300
Power Boost, hp (kW) - No Boost
Fuel Tank capacity, gal (L) - 20 (77)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged, intercooled
Fuel System Description - Rotary-Distributor Type
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

Case IH Farmall 75N Power Take-Off

PTO Horsepower, Standart / Optional Transmission, hp (kW) - 62 (46.2)
PTO Speeds, rpm - 540 std; 540 / 1000 opt.
PTO operational Type (Independent; Live; Continuous) - Independent

Standart Transmission

Manufacturer's Description - 16 x 16 w/Mechanical Shuttle
Transmission Type - 4 Synchronized Speeds in 4 Ranges
Number of Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 18.3 (29.5)
Creeper Range Available - See option w/Creeper
Shuttle (Forward-Reverse) Available - Standard

Optional Transmission

Manufacturer's Description - 32x16 Power Shuttle
Transmission Type - Power Shuttle with Hi/Lo
Number of Forward / Reverse Speeds - 32F / 16R
Manufacturer's Description - Optional Creeper; 44x16
Transmission Type - Shuttle + Creeper
Number of Forward / Reverse Speeds - 44F / 16R

Farmall 75N Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 2WD opt. / 4WD std.
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - 80.1 (2035)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 81.1 (2060)
Front Tire Size, 2WD - 6.00-16, 8 ply F2
Front Tire Size orTrack Width, MFD/4WD or Track - 7.50 R18, R1
Rear Tire Size or Track Width - 14.9 R28; 380/85 R28, R1

Axles and Brakes

Final Drive Location and Description - Inboard planetary
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet disc

Case IH Farmall 75N Hydraulics and Hitch

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Dual Gear
Implement Pump Flow, gpm (Lpm) - 12.7 (48.1)
Optional Pump Flow, gpm (Lpm) - 16.9 (64)
Number of Standard Remote Valves - 2 std, 3rd opt.
3-Point Hitch Category - Category 1 / 2
Optional Hitch Category - No option
Draft Sensing or Lift Control - Draft Control optional
Draft Link Ends Telescopic - Fixed
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 4,400 (1998)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Swinging

Farmall 75N Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - 152 (3861)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 153.5 (3900)
Height to Top of Cab, in (mm) - 90.7 (2303)
Height to Top of ROPS raised, in (mm) - 87 (2210)
Overall Width, with standard wheels or tracks, in (mm) - 53.5 (1359) MFD minimum
Weight, 2WD w/ROPS, lb (kg) - 5,027 (2280)
Weight, MFD/4WD w/ROPS, lb (kg) - 5,560 (2540)
Weight, 2WD w/Cab, lb (kg) - 5,334 (2420)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 5,886 (2670)