________________________________________________________________________________

Case IH Farmall 95U Specs

Farmall 95U Engine Specifications

Engine Model - Case IH F4CE9484M
Engine Power, Rated, hp (kW) - 95 (70.8)
Maximum Engine Power, hp (kW) - Same as Advertised
Engine Speed, rpm - 2300
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 33.5 (127)
Cylinders - 4
Displacement, cu in (L) - 274 (4.5)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged and Intercooled
Fuel System Type - Rotary-Distributor Type
Fuel System Control - Mechanical
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Exhaust Gas Recirculation (EGR) - Internal EGR
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Fixed
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

Case IH Farmall 95U Transmission

Description - 12x12 Synchronized Mechanical Shuttle
Transmission Type - 4 Synchronized Speeds in 3 Ranges
Forward / Reverse Speeds - 12F / 12R
Maximum Speed Forward, mph (kph) - 19.0 (30) w/2WD; 25.0 (40) w/MFD
Creeper Range - Yes
Shuttle (Forward-Reverse) - Yes

Description - 20 x12 Synchro with creeper
Transmission Type - Synchronized, with creeper
Forward / Reverse Speeds - 20F / 12R

Description - 24x24 Power Shuttle
Transmission Type - Power shuttle
Forward / Reverse Speeds - 24F / 24R

Farmall 95U Power Take-Off

PTO Horsepower, hp (kW) - 80 (59.7)
PTO Speeds, rpm - 540 / 1000
PTO Type - Independent

Wheels and Tires

Drive Wheels - 2WD / 4WD
Steering - Front Steer
Wheelbase 2WD, in (mm) - 92.2 (2342)
Wheelbase 4WD, in (mm) - 92.5 (2350)
Front Tire Size, 2WD - 10 x 16 - 8PR (F2)
Front Tire Size Width, 4WD - 14.9 R24 (R1W)
Rear Tire Size Width - 18.4 R34 (R1W)

Case IH Farmall 95U Axles and Brakes

Final Drive - Planetary / Inboard
Axle Output End - Flange
Brake Type - Wet Disc

Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Gear
Standard Pump Flow, gpm (Lpm) - 16.1 (61)
Standard Remote Valves - 2 std; 3 opt.

Farmall 95U Hitch

3-Point Hitch - Category 2
Draft Sensing or Lift Control - Mechanical or Electronic
Draft Link Ends Adjustable - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 5,745 (2605) - OECD
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 6,445 (2923) - OECD
Drawbar Description - Swinging

Case IH L740 Loader

Height (to pin) - 144 inches (365 cm)
Clearance, dumped bucket - 106 inches (269 cm)
Dump reach - 34 inches (86 cm)
Dump angle - 59
Rollback angle - 46
Breakout force (lift) - 3,850 lbs (1746 kg)
Lift to full height (at pin) - 3,200 lbs (1451 kg)