________________________________________________________________________________

Case IH Farmall 30A 4B Tractor Specs

Classification - Compact Utility tractor

Case IH Farmall 30A Engine Specifications

Engine Model - IHI Shibaura N843T-F
Number of Cylinders - 3
Advertised Engine Power, Rated, hp (kW) - 32.2 (24)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2600
Power Boost, hp (kW) - No boost
Displacement, cu in (L) - 91.3 (1.496)
Engine Bore, in (mm) - 3.307 (84)
Engine Stroke, in (mm) - 3.543 (90)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged
Fuel System Description - In-Line Pump System
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect Indirect
Emission Level, US EPA Tier - Tier 4B / Final
Exhaust Gas Recirculation (EGR) - Internal EGR
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - DPF standard
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 85
Fuel Tank capacity, gal (L) - 7.4 (28)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF

Farmall 30A Power Take-Off Performance

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 27.4 (20.4) Gear / 25.8 (19.2) HST
PTO Speeds, rpm - 540
Power Take-Off operational Type (Independent; Live; Continuous) - Independent

Basic Transmission Configuration

Manufacturer's Description - 12x12 Gear w/ Synchronized Shuttle
Transmission Type - Synchronized shuttle; gears/ranges non-synch
Number of Forward / Reverse Speeds - 12F / 12R
Maximum Speed Forward, mph (kph) - 14.2 (22.9)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Standard

Case IH Farmall 30 A 4B Tractor Optional Transmission

Manufacturer's Description - 3-Range Hydrostatic
Transmission Type - Hydrostatic; Cruise standard
Number of Forward / Reverse Speeds - Infinite, 3 ranges

Wheel Configuration

Drive Wheels - 4WD
Steering Configuration - Front Steering

Rear Axle Assembly

Final Drive Location and Description - Inboard planetary
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle

Front Axle

Suspended Front Axle Available - No

Brakes

Service Brake Type - Wet disc

CaseIH Farmall 30A Tractor Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 8.2 (31)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1 or 2 optional

Farmall 30A 3-Point Hitch Features

3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position control
Draft Link Ends Telescopic - No

3-Point Hitch Lift Capacity

Standard Lift Capacity 24 Inches behind pin, lb (kg) - 1,433 (650)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - 1,808 (820)
Optional Lift Capacity at lift pin, lb (kg) - No option

Drawbar

Drawbar Description - Extendable

Wheelbase

Wheelbase, MFD/4WD, in (mm) - 67.5 (1715)

Length

Length, MFD/4WD, incl. Hitch/Drawbar, in (mm) - 121 (3074)

Farmall 30 A Vertical Dimensions

Height to Top of Cab, in (mm) - No Cab
Height to Top of ROPS raised, in (mm) - 87.7 (2227)

Width w/Tires

Overall Width, with standard wheels, in (mm) - 66.5 (1689)

Weight (w/Tires)

Weight, MFD/4WD w/ROPS, lb (kg) - 2,563 (1163)
Weight, MFD/4WD w/Cab, without ballast, lb (kg) - No cab
Weight, Total allowable, w/maximum ballast, lb (kg) - 3,867 (1754)

Tire Size

Front Tire Size Width, MFD/4WD - 25x8.50-14, 6PR R4
Rear Tire Size Width - 43x16.00-20, 4PR R4