________________________________________________________________________________

Case IH Farmall 40B Specs

Farmall 40B Engine Specifications

Engine Model - Mitsubishi S4Q2
Engine Power, Rated, hp (kW) - 41 (31)
Engine Speed, rpm - 2600
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 9.5 (36)
Cylinders - 4
Displacement, cu in (L) - 153 (2.5)
Engine Bore, in (mm) - 3.46 (88)
Engine Stroke, in (mm) - 4.06 (103)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Natural
Fuel System Description - Rotary-Distributor Type
Fuel System Control - Mechanical
Fuel Injection to combustion chamber - Indirect
Emission Level - Tier 3
Exhaust Pipe - Horizontal
Tractor Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 50

Case IH Farmall 40B Transmission

Description - 16x16 Synchro Shuttle
Transmission Type - Mechanical
Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 15.2 (24.4)
Creeper Range - No
Shuttle (Forward-Reverse) - Yes
Description - Hydrostatic
Transmission Type - Hydrostatic, 3 range
Forward / Reverse Speeds - Infinite, 3 ranges

Farmall 40B Power take off

PTO Horsepower, hp (kW) - 34 (25) / 32 (24)
PTO Speeds, rpm - 540
PTO operational Type - Independent

Wheels and Tires

Drive Wheels - 4WD
Tractor Steering Configuration - Front Steer
Wheelbase, 4WD, in (mm) - 69 (1753)
Front Tire Size, 4WD - 9.5x16, 4PR, R1
Rear Tire Size - 13.6-24, 4PR, R1

Axles and Brakes

Final Drive - Inboard Planetary
Axle Output End - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle - No
Brake Type - Wet Multi Disc

Case IH Farmall 40B Hydraulics and Hitch

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Gear
Standard Pump Flow, gpm (Lpm) - 8.2 (31.2)
Optional Pump Flow, gpm (Lpm) - No option
Standard Remote Valves - Optional
3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Optional top link sensing
Draft Link Ends Adjustable - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 2,469 (1120)
Standard Lift Capacity at lift pin, lb (kg) - 2,756 (1250)
Drawbar Description - Extendable

Farmall 40B Dimensions

Weight - 3,725 lbs (1689 kg)
Wheelbase - 69 inches (1750 mm)
Length - 121 inches (3070 mm)
Height (ROPS) - 96 inches (2430 mm)
Rear axle - Flange
Front tread - 51.7 inches (1310 mm)

Case L350 Loader

Height (to pin) - 106.8 inches (2710 mm)
Dump angle - 51.4
Rollback angle - 30.3
Breakout force (at pin) - 3470 lbs (1573 kg)
Breakout force (at 500mm) - 2300 lbs (1043 kg)
Lift to full height (at pin) - 1940 lbs (879 kg)
Lift to full height (at 500mm) - 1370 lbs (621 kg)
Raise time to height - 4.1s
Bucket dump time - 3.8s
Lowering time - 2.0s