________________________________________________________________________________

Case IH Farmall 40C Tractor Specs

Classification - Compact Utility tractor

Case IH Farmall 40C Engine Specifications

Engine Make - IHI Shibaura
Engine Model - N844L-F-30
Number of Cylinders - 4
Advertised Engine Power, Rated, hp (kW) - 41 (30)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2600
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 10.5 (40)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Displacement, cu in (L) - 135 (2.216)
Engine Bore, in (mm) - 3.307 (84)
Engine Stroke, in (mm) - 3.937 (100)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Natural
Fuel System Description - In-Line Pump System
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Indirect
Emission Level, US EPA Tier - Tier 4B / Final
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - DPF standard
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 85

Case 40C Farmall Basic Transmission Configuration

Manufacturer's Description - 16x16 Synchro-shuttle
Transmission Type - 4 gears synchro, 4 ranges non-synchro
Number of Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 17 (27.3)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Standard

Optional Transmission 1

Manufacturer's Description - 3-Range Hydrostatic
Transmission Type - Hydrostatic w/Cruise Control
Number of Forward / Reverse Speeds - Infinite, 3 ranges

Farmall 40 C PTO Performance

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 32.4 / 30.8 (24.2 / 23)
Power Take Off Speeds, rpm - 540
PTO operational Type (Independent; Live; Continuous) - Independent

Wheel Configuration

Drive Wheels - 4WD
Steering Configuration - Front Steer

Rear Axle and Front Axle

Final Drive Location and Description - Inboard planetary
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No

Brakes

Service Brake Type - Wet disc

Case Farmall 40 C Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Dual gear
Implement Pump Flow, gpm (Lpm) - 8.2 (31)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1 or 2 optional

Case Farmall 40C Farmall Tractor 3-Point Hitch Features

3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position control
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 2,116 (960)
Standard Lift Capacity at lift pin, lb (kg) - 2,756 (1250)

Drawbar

Drawbar Description - Extendable

Wheelbase

Wheelbase, MFD/4WD or Track, in (mm) - 73 (1854)

Length, Height and Width

Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 129 (3277)
Height to Top of ROPS raised, in (mm) - 96.5 (2451)
Overall Width, with standard wheels or tracks, in (mm) - 69 (1753)

Weight (w/Tires)

Weight, MFD/4WD w/ROPS, lb (kg) - 3,945 (1789)

Tire Size

Front Tire Size orTrack Width, MFD/4WD or Track - 12x16.5, 6PR R4
Rear Tire Size or Track Width - 17.5Lx24, 6PR R4