________________________________________________________________________________

Case IH Farmall 65C Specs

Farmall 65C Engine Specifications

Engine Make - FPT
Engine Model - 3.4 L
Number of Cylinders - 4
Displacement, cu in (L) - 207 (3.4)
Engine Bore, in (mm) - 3.90 (99)
Engine Stroke, in (mm) - 4.33 (110)
Advertised Engine Power, Rated, hp (kW) - 64 (47.7)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2300
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 23.8 (90)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Wastegate turbocharged
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - Cooled EGR
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - Particulate Matter Catalyst
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 50 (37)
PTO Speeds, rpm - 540 std; 540 / 540E opt.
PTO operational Type (Independent; Live; Continuous) - Fully independent

Case IH Farmall 65C Transmission Configuration

Manufacturer's Description - 12x12 Power Shuttle
Transmission Type - 4 Synchronized gears, 3 non-synch ranges
Number of Forward / Reverse Speeds - 12F x 12R
Maximum Speed Forward, mph (kph) - 19 (30.6)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Standard

Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 83.9 (2132)
Front Tire Size orTrack Width, MFD/4WD or Track - 11.2 R24, R1W
Rear Tire Size or Track Width - 16.9 R30, R1W

Farmall 65C Axles and Brakes

Final Drive Location and Description - Inboard Planetary
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet Disc

Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Tandem Gear
Implement Pump Flow, gpm (Lpm) - 12.5 (47.5)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 2 std; 3rd dealer install

Case IH Farmall 65C Hitch

3-Point Hitch Category - Category 2
Optional Hitch Category - No option
Draft Sensing or Lift Control - Top link draft sensing
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 3,664 (1662)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - 4,832 (2192)
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Swinging

Farmall 65C Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 151 (3836)
Height to Top of Cab, in (mm) - 97.8 (2484)
Overall Width, with standard wheels or tracks, in (mm) - 75.7 (1922)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 6,239 (2830)
Weight, Total allowable, w/maximum ballast, lb (kg) - 7,338 (3328)

Case IH L720 Loader

Height (to pin) - 122 inches (309 cm)
Clearance, dumped bucket - 85 inches (215 cm)
Dump reach - 30 inches (76 cm)
Dump angle - 65
Rollback angle - 45
Breakout force (lift) - 2,650 lbs (1202 kg)
Lift to full height (at pin) - 2,100 lbs (952 kg)