________________________________________________________________________________
Case IH Farmall 75A Specs
Farmall 75A Engine Specifications
Engine Model - Case IH F32
Engine Type - 4-Cylinder Diesel
Number of Cylinders /Aspiration - 4/Turbocharged
Engine Power, Rated, hp (kW) - 75 (56)
Maximum Engine Power, hp (kW) - Same as Advertised
Engine Speed, rpm - 2500
Gross Engine/PTO HP - 75/66
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 16.4 (62)
Displacement, cu in (L) - 195 (3.2)
Engine Bore, in (mm) - 3.90 (99)
Engine Stroke, in (mm) - 4.095 (104)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged
Fuel System Type - Rotary-Distributor
Fuel Type - Standard diesel fuels or B100 Biodiesel (meeting ASTM6751
standards)
Fuel System Control - Mechanical
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Diesel Oxidation Catalyst (DOC) - No
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Belt
System Rating, Volts - 12
Alternator Rating, Amps - 65
Battery Capacity (Cold Cranking Amps) - 800
Lighting - 2hi/lo beam halogen headlights, flashing safety lights/turn
signals
Accessory Power Outlets - Standard equipment, 7-pin implement outlet
Case IH Farmall 75A Transmission
Description - 8x2 Partially Synchronized
Clutch - Dry, 11-inch (279.4mm) diameter organic plate
Transmission Type - Gear
Forward / Reverse Speeds - 8F x 2R
Maximum Speed Forward, mph (kph) - 19.0 (30.5)
Creeper Range - No
Shuttle (Forward-Reverse) - No
Power Take-Off
PTO Horsepower, hp (kW) - 66 (49)
PTO Speeds, rpm - 540
PTO Type - Independent
Farmall 75A Wheels and Tires
Drive Wheels - 2WD / 4WD
Steering - Front Steer
Wheelbase 2WD, in (mm) - 84.6 (2150)
Wheelbase 4WD, in (mm) - 87.0 (2210)
Front Tire Size, 2WD - 7.50x16, 6PR F2
Front Tire Size Width, 4WD - 11.2x24 6PR R1
Rear Tire Size Width - 16.9x30, 6PR R1
Axles and Brakes
Final Drive - Inboard/ Planetary
Axle Output End - Flange
Front Differential Lock - Limited Slip
FWD Clutch Engagement - Mechanical Lever
Brake Type - Wet Disc
Case IH Farmall 75A Hydraulic System
Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Fixed Displacement Gear Pump
Steering System - Hydrostatic power steering w/dedicated gear pump 8.5
gpm (32 L/min.)
Total Maximum Tractor Flow - 18.7 gpm (71.3 L/min.)
Standard Pump Flow, gpm (Lpm) - 10.8 (41)
Standard Remote Valves - 1
Farmall 75A Hitch
3-Point Hitch - Category 2 / 1
Optional Hitch - Category 1
Draft Sensing or Lift Control - Top Link - Mechanical
Draft Link Ends Adjustable - Yes
Rear PTO - Standard 540-RPM, w/flip-up PTO shaft guard
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 2,954 (1340)
Drawbar Description - Swinging
General Specifications
Approx. Shipping Weight, 2WD/4WD - 5059 lbs. (2295 kg.)/5688 lbs. (2580
kg.)
Approx. Shipping Length, 2WD/4WD - 137.2 in. (3543 mm.)/139.6 in. (3543
mm.)
Approx. Shipping Width, 2WD/4WD - 78.4 in. (1990 mm.)/78.4 in. (1990
mm.)
Approx. Shipping Heigth, 2WD/4WD 93.9 in. - 96.9 in. (2460 mm.)/96.9 in.
(2460 mm.)
Case IH L540 Loader
Height (to pin) - 126 inches (320 cm)
Dump angle - 37
Rollback angle - 24
Breakout force (at pin) - 4,670 lbs (2118 kg)
Lift to full height (at pin) - 3,250 lbs (1474 kg)
________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
CASE IH TRACTORS SPECIFICATIONS |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
CASE IH FRONT END LOADERS SPECS |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________