________________________________________________________________________________

Case IH Farmall 80 Specs

Farmall 80 Engine Specifications

Engine Type - Diesel
Engine Model - Case IH FPT F32
Engine Power, Rated, hp (kW) - 72 (53.7)
Rated Engine Speed, rpm - 2500
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 23.8 (90.1)
Cylinders - 4
Displacement, cu in (L) - 195 (3.2)
Engine Bore, in (mm) - 3.90 (99)
Engine Stroke, in (mm) - 4.094 (104)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged and Intercooled
Fuel System Type - Rotary-Distributor Type
Fuel System Control - Mechanical
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Viscous
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

Case IH Farmall 80 Transmission

Description - 12x12 Synchronized Mechanical Shuttle
Transmission Type - 4 Synchronized Speeds in 3 Ranges
Forward / Reverse Speeds - 12F / 12R
Maximum Speed Forward, mph (kph) - 19 (30)
Creeper Range - Yes
Shuttle (Forward-Reverse) - Yes

Power Take-Off

PTO Horsepower, hp (kW) - 62 (46.2)
PTO Speeds, rpm - 540
PTO Type - Independent

Farmall 80 Wheels and Tires

Drive Wheels - 2WD / 4WD
Steering - Front Steer
Wheelbase, 2WD, in (mm) - 96 (2438)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 96 (2438)
Front Tire Size, 2WD - 6.00-16, 8 PR F2
Front Tire Size orTrack Width, MFD/4WD or Track - 7.50 R18, R1
Rear Tire Size or Track Width - 14.9 R28; 380/85 R28, R1

Case IH Farmall 80 Axles and Brakes

Final Drive - Planetary
Axle Output End - Flange
Brake Type - Wet Disc

Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Gear
Standard Pump Flow, gpm (Lpm) - 13.6 (51.7)
Standard Remote Valves - 1

Farmall 80 Hitch

3-Point Hitch - Category 2
Draft Sensing or Lift Control - Mechanical lower link
3-Point Hitch Lift Capacity -
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 5,025 (2279)
Drawbar Description - Swinging

Case IH L730 Loader

Height (to pin) - 133 inches (337 cm)
Clearance, dumped bucket - 96 inches (243 cm)
Dump reach - 25 inches (63 cm)
Dump angle - 55
Rollback angle - 50
Breakout force (lift) - 3,100 lbs (1406 kg)
Lift to full height (at pin) - 2,500 lbs (1134 kg)