________________________________________________________________________________

Case IH Farmall 85C Specs

Farmall 85C Engine Specifications

Engine Make - Case IH FPT
Engine Model - 445TA/MNG
Number of Cylinders - 4
Displacement, cu in (L) - 274 (4.5)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Advertised Engine Power, Rated, hp (kW) - 84 (63)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2300
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 23.2 (88)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Block Design, Replaceable Liners - Dry Liners
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged and Intercooled
Fuel System Description - Rotary-Distributor Type
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 3
Exhaust Pipe, Vertical stack or Horizontal - Underhood muffler, vertical stack
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

Power Take-Off

PTO Horsepower, Standart / Optional Transmission, hp (kW) - 70 (52.2)
PTO Speeds, rpm - 540
PTO operational Type (Independent; Live; Continuous) - Independent

Case IH Farmall 85C Transmission

Manufacturer's Description - 16x16 Synchronized Mechanical Shuttle
Transmission Type - 4 Synchronized Speeds in 4 Ranges
Number of Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 19.0 (30) / 25 (40) - Optional
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Yes
Manufacturer's Description - 16x16 Power Shuttle
Transmission Type - 4 Synchronized Speeds in 4 Ranges
Number of Forward / Reverse Speeds - 16F / 16R

Farmall 85C Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 86.0 (2185)
Front Tire Size orTrack Width, MFD/4WD or Track - 11.2 R24, R1W
Rear Tire Size or Track Width - 16.9 R30 (R1W)

Case IH Farmall 85C Axles and Brakes

Final Drive Location and Description - Planetary / Inboard
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet Disc

Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 15 (57)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1 std; 2 opt

Farmall 85C Hitch

3-Point Hitch Category - Category 2
Optional Hitch Category - Category 1
Draft Sensing or Lift Control - Mechanical lower link
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 3,962 (1800) - ASAE
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Swinging, extendable

Dimensions and Weight

Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 157 (3987)
Height to Top of Cab, in (mm) - 91.4 (2322)
Height to Top of ROPS raised, in (mm) - 95.6 (2428)
Overall Width, with standard wheels or tracks, in (mm) - 69.6 (1768) min / 93.1 (2365) max
Weight, MFD/4WD w/ROPS, lb (kg) - 6,503 (2950)
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 6,944 (3150)

Case L720 Loader

Loader type - CaseIH L720
Height (to pin) - 124 inches (314 cm)
Clearance, dumped bucket - 86 inches (218 cm)
Dump reach - 28 inches (71 cm)
Dump angle - 64
Rollback angle - 45
Breakout force (lift) - 2,650 lbs (1202 kg)
Lift to full height (at pin) - 2,100 lbs (952 kg)