________________________________________________________________________________

Case IH Puma 125 Specs

Puma 125 Engine Specifications

Engine Make - Case IH FPT
Engine Model - NEF 667TA
Number of Cylinders - 6
Displacement, cu in (L) - 411 (6.7)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Advertised Engine Power, Rated, hp (kW) - 125 (93)
Maximum Engine Power, hp (kW) - 148 (110)
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - 25 (19)
Fuel Tank capacity, gal (L) - 75 (284)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged, air-to-air aftercooled
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - Viscous
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 150 Std / 200 Opt

Case IH Puma 125 Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 105 (78)
PTO Speeds, rpm - 540 / 1000
PTO operational Type (Independent; Live; Continuous) - Independent

Basic Transmission

Manufacturer's Description - 18 x 6 Full Powershift
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 18F / 6R
Maximum Speed Forward, mph (kph) - 25 (40)
Creeper Range Available - Optional
Shuttle (Forward-Reverse) Available - Yes

Optional Transmission

Manufacturer's Description - 19 x 6 Hi-Speed Gear
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 19F / 6R

Puma 125 Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 107.8 (2739) / 109.7 (2786) Suspended Axle
Front Tire Size orTrack Width, MFD/4WD or Track - 14.9 R30
Rear Tire Size or Track Width - 18.4 R42

Axles and Brakes

Final Drive Location and Description - Planetary / Inboard
Axle Output End, Flange or Bar - Flange or bar
Axle Bar Diameter, in (mm) - 3.62 (92)
Suspended Front Axle Available - Optional
Service Brake Type - Wet disc

Case IH Puma 125 Hydraulic System

Hydraulic System Type - Closed Center, Pressure Flow Compensated (PFC)
Main Hydraulic Pump Type - Variable Displacement
Implement Pump Flow, gpm (Lpm) - 26.5 (100)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 2 Mechanical

3-Point Hitch

3-Point Hitch Category - Category 2 / 3N
Optional Hitch Category - No option
Draft Sensing or Lift Control - Electronic Draft Control (EDC)
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 7,900 (3584)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 9,200 (4173)
Optional Lift Capacity at lift pin, lb (kg) - np
Drawbar Description - Swinging

Puma 125 Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 179.5 (4559)
Height to Top of Cab, in (mm) - 118.3 (3005)
Height to Top of ROPS raised, in (mm) - No open ROPS
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 13,228 (6000)
Weight, Total allowable, w/maximum ballast, lb (kg) - 23,149 (10500)

Case IH L760 Loader

Height (to pin) - 167 inches (424 cm)
Clearance, dumped bucket - 129 inches (327 cm)
Dump reach - 31 inches (78 cm)
Dump angle - 56
Reach at ground - 107 inches (271 cm)
Rollback angle - 43
Breakout force (lift) - 4,999 lbs (2267 kg)
Lift to full height (at 800mm) - 4,300 lbs (1950 kg)