________________________________________________________________________________

Kubota B8200HST Maintenance Data

Kubota B8200HST Maintenance Intervals

Every Ten Hours or Daily

Check the engine oil level. If after checking the oil level is low, add it.

Check the hydraulic/transmission fluid level. If hydraulic/transmission oil is too low, fill in new oil.

Engine air filter checking. Change if required.

Check the coolant level. If the coolant level is too low, add coolant in cooling system.

Check idle engine speed, steering, hand brake and service brakes. Repair any damage if required.

Every 75 Hours

Replace engine oil. Recommended oil type: SAE20, SAE30 or 10W-30. Oil system capacity (Kubota D950-A): 3.3 qts (3.1 L). Check engine oil level after replacement.

Checking the air pressure of tyres. Inflate if required.

Inspect the battery. Clean the terminals as required.

Lubricate front and rear axle hub bearings.

Inspect wheels and tighten bolts and nuts if necessary.

Every 100 hours

Check and service engine air filter element.

Inspect and service fuel filter.

Check front axle oil level. Fill as required.

Check hydraulic oil level. If necessary, add hydraulic fluid to the system.

Every 150 hours

Oil filter changing. Oil filter part number: HH150-32094. When replace the filter, flushing the housing is necessary. When installation is complete, check the oil level. If necessary, add it.

Clean radiator fins if fins are dirty.

Check the torque of the wheel bolts.

Every 200 hours

Replacing hydrostatic transmission oil filter. HST filter part number - 32701-37950. After installation, checking the transmission fluid level is recommended. Add fluid if required.

Changing air filter element. Air filter element part number: 70000-11221.

Inspect and adjust alternator/fan belt. Change if belt is worn. Part Number: 70000-73783.

Every 300 Hours

Replace transmission/hydraulic fluid. Recommended transmission/hydraulic oil type: Kubota UDT or Super UDT. Transmission/hydraulic oil capacity: 19.0 qts (17.9 L). After installing a new filter, check that the transmission fluid level is correct.

Changing hydraulic filter element. Part number of hydraulic filter: 67800-37120. After installation, checking the transmission/hydraulic fluid level is recommended. If necessary, add it.

Change fuel filter. Engine fuel filter part number: 1T021-43560. Check diesel fuel pump adjustment.

Check the coolant in cooling system. Top up if required.

Check engine idle speeds. Adjust if necessary.

Check the tubes and hoses. Tighten as required.

Front axle lubricant change. Steering gearbox: 0.20 qts (0.19 L). Front axle differential case: 2.2 qts (2.1 L). Front axle gear case: 0.50 qts (0.47 L).

Check and adjust the service and parking brakes.

Yearly Maintenance

Kubota B8200HST replacement parts

Engine Air Filter. Part Number: 70000-11221
Engine Oil Filter. Part Number: HH150-32094
Engine Fuel Filter Element. Part Number: 1T021-43560
Drive Belt. Part Number: 70000-73783
Hydraulic/Transmission Oil Filter. Part Number: 67800-37120
Hydrostatic Transmission Filter. Part Number: 32701-37950

Change engine oil and filter. Service lubrication system components.

Install a new air filter elements.

Replace HST filter.

Replace hydraulic filter and add fresh fluid to hydraulic/transmission system.

Change the fuel filter by first drain water from fuel tank.

Clean oil cooler fins and radiator.

Flush the cooling system and add fresh coolant. Cooling system capacity: 4.2 qts (4.0 L).

Check all hoses and clamps.

Check level of battery electrolyte.

Check and adjust valve clearance.

Check and adjust fuel injection nozzle.

KUBOTA TRACTORS TROUBLESHOOTING
L235	L2501	L2550	L275	L3110
L3301	L35	L3710	L3901	L4310
L5030	M4700	M5700	M6040	M6800
M8200	M8540	M9000	MX5100	MX5200