________________________________________________________________________________

Massey Ferguson 3120T Inspection and Maintenance

Massey Ferguson 3120T Maintenance Intervals

Every 10 Hours or Daily Inspection

Engine oil level checking procedure. If the engine oil level is low, add fresh oil.

Check the hydraulic/transmission fluid level. If the hydraulic/transmission fluid is too low, add it.

Checking engine air filter. Change if necessary.

Check radiator coolant level. If the coolant level is low, add it.

Check engine idling, steering system, hand brake and service brakes. If you found a problem, fix it.

Oil And Filter Change

Every 250 hours

Changing engine oil. Recommended engine oil type: SAE 10W-30, 15W-30, 10W-40. API service classification SE, SF, SG, CC, CD, CF. Engine oil capacity: 15.6 qt (14.8 L). After completing the filling procedure, check motor oil level.

Change engine oil filter. Oil filter part number: 1447031M2. When change the filter, cleaning the housing is recommended. Check the oil level after installing a new filter. If necessary, add it.

Check engine air filters. Change if required. Engine primary air filter part number: 1062501V91. Engine secondary air filter part number: 70257029.

Inspect cab air filter and replace if necessary. Part number - 3388840V2/3389746M1 (Carbon).

Every 500 hours

Replace hydraulic filter element. Part number of hydraulic filter: 3581032M2/4303303M1. When installation procedure is complete, check the hydraulic/transmission oil level. Add fluid if required.

Change engine fuel filter. Fuel filter element part number: 3638291M1 (Spin-on) / 836218V92, 4223713M91 (Sediment Bowl). Check the correct operation of injection pump.

Every 1000 hours

Transmission/hydraulic fluid change. Recommended oil type: M-1127, M-1135, M-1139, M-1144, SAE 10W-30, 15W-30. API Service Category: CE, CG-4, GL-4, SF. Transmission and hydraulic fluid capacity: 15.1 gal (56.0 L). After completing the filling procedure, check hydraulic/transmission oil level.

Replacing steering fluid filter. Steering filter part number: 3619594V1/3799315M1. Check the steering fluid level after installing a new filter. If required, add it.

Front axle lubricant change. Front Axle Oil Type - Gear Lube GL-3, GL-5, 80W-90. Front Axle Oil Capacity: 1.7 gal (6.0 L), Reductions Units: 0.5 gal (1.8 L).

Annual Maintenance

Massey Ferguson 3120T replacement parts

Engine Primary Air Filter. Part Number: 1062501V91
Engine Secondary Air Filter Element. Part Number: 70257029
Engine Oil Filter. Part Number: 1447031M2
Engine Fuel Filter. Part Number: 3638291M1 (Spin-on) / 836218V92, 4223713M91 (Sediment Bowl)
Hydraulic Filter. Part Number: 3581032M2/4303303M1
Steering Filter Element. Part Number: 3619594V1 (6-in) / 3799315M1 (8-in)
Cab Air Filter. Part Number: 3388840V2/3389746M1 (Carbon)

Replace filter and engine oil. Service lubricating system components.

Change engine primary/secondary air filter elements.

Replace steering filter element.

Change hydraulic/transmission oil and install a new hydraulic filter.

Drain water from fuel tank and change fuel filter.

Install a new cab air filter.

Clean oil cooler fins and radiator.

Drain, flush and refill engine cooling system. Cooling System Capacity - 26.5 qts (25 L).

Check all hoses and clamps.

Check level of battery electrolyte.

Check and adjust valve clearance.

Inspect and adjust fuel injectors.