________________________________________________________________________________

Case IH 845 XL Technical Data

Case IH 845XL Engine Specifications

Engine Model ................ IH D268
Engine Type ................ 4-stroke, 4-cylinder liquid-cooled diesel
Number of Cylinders ................ 4
Displacement, cu in (L) ................ 268 (4.40)
Engine Bore, in (mm) ................ 3.94 (100.0)
Engine Stroke, in (mm) ................ 5.50 (140.0)
Aspiration ................ Natural
Rated Engine Power, hp (kW) ................ 80.0 (59.7)
Rated Engine Speed, rpm ................ 2300
Maximum Torque, Nm (ft-lbs) ................ 296 (218)
Torque Speed, rpm ................ 1300
Compression ................ 16:1
Fuel System ................ Direct injection
Fuel Tank Capacity, gal (L) ................ 28.0 (106.0)
Oil Capacity, qts (L) ................ 12.7 (12.0)
Coolant Capacity, qts (L) ................ 20.4 (19.3)
Electrical System Rating, Volts ................ 12
Charging System ................ Alternator
Alternator Rating, Amps ................ 55

Case IH 845 XL Power Take-Off

PTO Operational Type ................ Independent
PTO Horsepower, hp (kW) ................ 66.3 (51.5)
PTO Clutch ................ Hydraulic
PTO Speeds, rpm ................ 540/1000

Transmission

Transmission Type ................ IH Total-Synchron
Gearbox Type ................ 16F/8R, fully synchronized
Number of Forward Gears ................ 16
Number of Reverse Gears ................ 8
Clutch ................ Dry disc
Maximum Forward Speed, mph (kph) ................ 18.0 (28.9)
Maximum Reverse Speed, mph (kph) ................ 10.8 (17.4)

Case IH 845 XL Wheels and Tires

Drive Wheels ................ 2WD/4WD
Steering Configuration ................ Front Steer
Steering System ................ Hydrostatic power
Brakes Type ................ Wet disc
Front Tire Size (2WD) ................ 10.0-R16
Rear Tire Size (2WD) ................ 18.4-R34
Front Tire Size (4WD) ................ 11.2-R28
Rear Tire Size (4WD) ................ 18.4-R34

Case IH 845XL Hydraulics and Hitch

Hydraulic System Type ................ Open Center
Implement Pump Flow, gpm (Lpm) ................ 8.7 (32.9)
Hydraulic Pressure, Bar (psi) ................ 167 (2420)
Number of Standard Remote Valves ................ 1/3
3-Point Hitch Category ................ 2
Draft Sensing or Lift Control ................ Lower link draft sensing
Standard Lift Capacity at lift pin, lb (kg) ................ 6945 (3150)

Dimensions and Weight

Wheelbase (2WD), in (mm) ................ 94.1 (2390)
Wheelbase (4WD), in (mm) ................ 92.5 (2340)
Length (2WD), in (mm) ................ 153.2 (3890)
Length (4WD), in (mm) ................ 156.3 (3970)
Height (Cab), in (mm) ................ 106.2 (2690)
Overall Width, in (mm) ................ 80.7 (2040)
Ground Clearance (2WD), in (mm) ................ 19.1 (480)
Ground Clearance (4WD), in (mm) ................ 15.9 (400)
Weight (2WD), lb (kg) ................ 8070 (3660)
Weight (4WD), lb (kg) ................ 8750 (3970)

CASE IH TRACTORS TROUBLESHOOTING
585	695	885	895	1494
1594	2096	2294	4230	5120
5130	5140	5220	5230	7110
7120	7220	7240	CS110	CVX130
CVX170	CX100	CX90	Farmall 75C	Farmall 95
Farmall 110A	Farmall 140A	JX100	JXU105	Magnum 250
Magnum 305	Maxxum 125	MX110	MX135	MX270