________________________________________________________________________________

Case IH 9250 Specifications

Case IH 9250 Engine Technical Data

Engine Model .................. Cummins LTA10
Engine Type .......... 4-stroke, six-cylinder turbocharged aftercooled diesel
Number of Cylinders .................. 6
Displacement, cu in (L) .................. 611 (10.0)
Engine Bore, in (mm) .................. 4.92 (125.0)
Engine Stroke, in (mm) .................. 5.35 (136.0)
Aspiration .................. Turbocharged
Rated Engine Power, hp (kW) .................. 300.0 (223.7)
Rated Engine Speed, rpm .................. 2100
Maximum Torque, Nm (ft-lbs) .................. 1376 (1015)
Torque Speed, rpm .................. 1300
Compression .................. 16.0:1
Firing Order .................. 1-5-3-6-2-4
Fuel System .................. Injection pump
Fuel Tank Capacity, gal (L) .................. 200.0 (757.0)
Oil Capacity, qts (L) .................. 44.0 (41.6)
Coolant Capacity, qts (L) .................. 54.0 (51.1)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator

Case IH 9250 Power Take-Off

PTO Operational Type .................. Independent
PTO Horsepower, hp (kW) .................. 266.0 (198.4)
PTO Speed, rpm .................. 1000
PTO / Engine Speed, rpm .................. 1000/2098

Transmission Configuration

Transmission Type .................. Full powershift
Gearbox Type .................. 12F/3R
Number of Forward Gears .................. 12
Number of Reverse Gears .................. 3
Clutch Type .................. Hydraulic wet disc
Maximum Forward Speed, mph (kph) .................. 17.3 (27.8)
Maximum Reverse Speed, mph (kph) .................. 8.5 (13.7)

Case IH 9250 Wheels and Tires

Drive Wheels .................. 4WD 4x4
Steering Configuration .................. Front steer
Steering System .................. Hydrostatic and articulated
Brakes Type .................. Hydraulic caliper disc
Front Tire Size .................. 20.8-38
Rear Tire Size .................. 20.8-38
Front Tread, in (mm) .................. 60-130 (1520-3300)
Rear Tread, in (mm) .................. 60-130 (1520-3300)

Case IH 9250 Hydraulics and Hitch

Hydraulic System Type ...... Closed center load sensing, pressure compensating
Implement Pump Flow, gpm (Lpm) .................. 27.0 (102.3)
Hydraulic Pressure, Bar (psi) .................. 172.5 (2500)
Fluid Capacity, gal (L) .................. 18.0 (68.1)
Number of Standard Remote Valves .................. 4
3-Point Hitch Category .................. 3
Standard Lift Capacity at lift pin, lb (kg) .................. 12750 (5785)

Dimensions and Weight

Wheelbase, in (mm) .................. 131 (3320)
Overall Length, in (mm) .................. 272.9 (6930)
Height (Exhaust), in (mm) .................. 143 (3630)
Width (Minimum), in (mm) .................. 93.5 (2370)
Ground Clearance, in (mm) .................. 16.5 (415)
Weight, lb (kg) .................. 30060 (13635)

CASE IH TRACTORS TROUBLESHOOTING
585	695	885	895	1494
1594	2096	2294	4230	5120
5130	5140	5220	5230	7110
7120	7220	7240	CS110	CVX130
CVX170	CX100	CX90	Farmall 75C	Farmall 95
Farmall 110A	Farmall 140A	JX100	JXU105	Magnum 250
Magnum 305	Maxxum 125	MX110	MX135	MX270