________________________________________________________________________________

Case IH Magnum 7130 Specifications

Case Magnum 7130 Engine Technical Data

Engine Model - Case-International 6T-830
Engine Type - 6-cylinder, 12-valve, turbocharged diesel
Number of Cylinders - Six, vertical inline
Displacement, cu in (L) - 505 (8,3)
Engine Bore, in (mm) - 4,49 (114,0)
Engine Stroke, in (mm) - 5,32 (135,0)
Aspiration - Turbocharged
Rated Engine Power, hp (kW) - 208,0 (153,6)
Rated Engine Speed, rpm - 2200
Idle Speed, rpm - 825-2395
Compression - 17.3:1
Firing Order - 1-5-3-6-2-4
Fuel Injection Pump - Bosch PS6A
Valve Clearance (Intake), in (mm) - 0,012 (0,305)
Valve Clearance (Exhaust), in (mm) - 0,024 (0,609)
Fuel Tank Capacity, gal (L) - 95,0 (359,0)
Oil Capacity, qts (L) - 22,0 (21,0)
Coolant Capacity, qts (L) - 30,0 (28,6)
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 110

Case 7130 Magnum Power Take-Off

PTO Operational Type - Independent
PTO Horsepower, hp (kW) - 170,0 (126,8)
PTO Speeds, rpm - 1000
PTO / Engine Speeds, rpm - 1000/2200
PTO Clutch - Wet disc

Transmission Configuration

Transmission Type - 18F/2R, Full power shift
Number of Forward Speeds - 18
Number of Reverse Speeds - 2
Clutch - Hydraulic wet disc
Transmission Type - 24F/3R, Powershift with creeper
Number of Forward Speeds - 24
Number of Reverse Speeds - 3
Maximum Speed (Forward), mph (kph) - 19,6 (31,5)
Maximum Speed (Reverse), mph (kph) - 3,0 (4,8)
Maximum Forward Speed (Creeper), mph (kph) - 2,2 (3,5)
Maximum Reverse Speed (Creeper), mph (kph) - 0,8 (1,3)
Service Brake - Differential hydraulic wet disc

Case IH Magnum 7130 Wheels and Tires

Drive Wheels - 2WD/4WD
Steering Configuration - Front Steer
Steering System - Hydrostatic power
Front Tire Size (2WD) - 14L-16.1
Rear Tire Size (2WD) - 18.4R42
Front Tire Size (4WD) - 14.9R28
Rear Tire Size (4WD) - 18.4R42

Case Magnum 7130 Hydraulics and Hitch

Hydraulic System Type - Closed center (PFC)
Implement Pump Flow, gpm (Lpm) - 22,0 (83,3)
Total Flow, gpm (Lpm) - 29,0 (110,0)
Hydraulic Pressure, Bar (psi) - 180 (2600)
Hydraulic Capacity, gal (L) - 50,5 (191,0)
Number of Standard Remote Valves - 2/4
3-Point Hitch Category - 3/3N
Draft Sensing or Lift Control - Electronic lower link
Standard Lift Capacity 24-in behind pin, lb (kg) - 9300 (4220)

Magnum 7130 Dimensions and Weight

Wheelbase, in (mm) - 118,3 (3000)
Length (2WD), in (mm) - 191,4 (4860)
Length (4WD), in (mm) - 198,8 (5040)
Height (2WD), in (mm) - 119,3 (3030)
Height (4WD), in (mm) - 118,3 (3000)
Ground Clearance (2WD), in (mm) - 22,8 (570)
Ground Clearance (4WD), in (mm) - 17,6 (440)
Front Tread (2WD), in (mm) - 60-86 (1520-2180)
Front Tread (4WD), in (mm) - 60-95 (1520-2410)
Rear Tread, in (mm) - 60-127 (1520-3220)
Weight (2WD), lb (kg) - 16280 (7390)
Weight (4WD), lb (kg) - 17540 (7960)

CASE IH TRACTORS TROUBLESHOOTING
585	695	885	895	1494
1594	2096	2294	4230	5120
5130	5140	5220	5230	7110
7120	7220	7240	CS110	CVX130
CVX170	CX100	CX90	Farmall 75C	Farmall 95
Farmall 110A	Farmall 140A	JX100	JXU105	Magnum 250
Magnum 305	Maxxum 125	MX110	MX135	MX270