________________________________________________________________________________

John Deere 2036R Specs

John Deere 2036R Engine Specifications

Engine Manufacturer - Yanmar
Engine Model - 3TNV84T-BXJT4
Type - Diesel
Engine Gross Horsepower - 27.7 kW (37.1 hp)
Engine Net Power - 26.8 kW (35.9 hp)
Manufacturer’s Estimated PTO Horsepower - 21.7 kW (29.1 hp)
Low Idle Speed - 950 rpm
Rated Engine Speed - 2600 rpm
High Idle - 2800 rpm
Operating Range - 950-2800 rpm
Engine Torque @ Rated Speed - 106 Nm (78 lb-ft)
Maximum Torque @ 1800 rpm - 120 Nm (88.5 lb-ft)
Displacement - 1.5 L
Cylinders - 3
Cooling System - Liquid
Oil Filter - Single Element
Air Cleaner - Dual Element
Starting Aid - Air Heater
Battery Voltage - 12V
Battery Cold Cranking Amps @ -18C (0F) - 500
Alternator Capacity - 75 Amp

JD 2036R Power Take-off

Rear PTO - Independent
Clutch - Wet disc
Rear RPM - 540 (1.375)
Mid PTO - Independent
Mid RPM - 2100
Front PTO (Opt.) - Independent
Front RPM - 2100
PTO Power - 30 hp (22.4 kW)

John Deere 2036R Drivetrain

Transmission Type - 2 Range Hydrostatic
Speeds - Infinite / 2 Range
Forward and Reverse Speed (Low Range) - 0-9.2 km/h (0-5.7 mph)
Forward and Reverse Speed (High Range) - 0-24.7 km/h (0-15.4 mph)
Mechanical Front Wheel Drive - Standard
Mechanical Front Wheel Drive Engagement - Stopped
Final Drive - Spur Gear
Differential lock - Mechanical Rear
Steering - Power Steering
Brakes - Wet disc
Rear Axle Capacity Weight - 1800 kg (3968 lb)
Front Axle Capacity Weight - 880 kg (1764 lb)

JD 2036R Hydraulic System and Hitch

Hydraulic System Type - Open center
Pump Type - Tandem Gear
Hydrostatic Pump Type - PV Axial Piston
System Relief Pressure - 17237 kPa (2500 psi)
Implement Pump Flow @ Rated Speed - 20.2 L/min (5.3 gpm)
Power Steering Pump Flow @ Rated Speed - 15 L/min (4 gpm)
Total Pump Flow - 35.2 L/min (9.3 gpm)
3-Point Hitch Type - Category 1
3-Point Hitch Lift Capacity at ends behind hitch ball - 946 kg (2086 lb)
3-Point Hitch Lift Capacity 61 cm (24 in.) behind hitch ball - 675 kg (1488 lb)

John Deere 2036R Tire Sizes

Front Tires (Standard) - 7.00-12
Rear Tires (Standard) - 12.4-16
Front Tires (Turf) - 23x8.5-14
Rear Tires (Turf) - 14-17.5
Front Tires (Lawn/Turf) - 200/60R15
Rear Tires (Lawn/Turf) - 300/70R20
Front Tires (Industrial) - 23x8.5-14
Rear Tires (Industrial) - 14-17.5

Capacities

Fuel Tank - 32 L (8.5 gal)
Cooling System (Open Operator Station) - 5.2 L (5.5 qt)
Cooling System (Cab) - 5.7 L (6.0 qt)
Crankcase with Filter - 4.3 L (4.5 qt)
Transmission and Hydraulic System - 23.5 L (24.8 qt)
Front Axle - 3.8 L (4 qt)

JD 2036R Dimensions

Wheelbase - 1723 mm (67.8 in.)
Overall Length from front bumper to 3-point hitch - 2990 mm (117.5 in.)
Overall Width - 1367.6 mm (53.8 in.)
Height from Ground to top of hood - 1280 mm (50.4 in.)
Height from Ground to top of ROPS - 2344 mm (92.3 in.)
Front Axle Ground Clearance - 248.5 mm (9.8 in.)
Turning Radius 2WD with brakes - 2.15 m (84.6 in.)
Turning Radius 2WD without brakes - 2.5 m (98.4 in.)
Base Tractor Weight - 1105 kg (2436 lb)
Maximum Permissible Weight per Front Axle - 800 kg (1764 lb)
Maximum Permissible Weight per Rear Axle - 1800 kg (3969 lb)
Maximum Vertical Load (Drawbar) - 500 kg
Maximum Vertical Load (Wagon Hitch) - 400 kg