________________________________________________________________________________

John Deere 3036E Specs

John Deere 3036E Engine Specifications

Engine Model - Yanmar 3TNV88- KJPT
Engine Type - 4 cycle, In- line, Water-Cooled Diesel
Combustion Type - Direct Injection
Gross rated Engine power @ rated rpm, hp - 26kW / 34.86 hp@ 2800 rpm
Max PTO Power - 21 kW±5% (28.5 hp±5%)
Max. Engine Torque - 105.5±4%
Cylinders - 3
Bore - 88 mm
Stroke - 90 mm
Displacement - 1.642 L
Compression Ratio - 19:1
Firing Order - 1-3-2
Low Idle - 950±25 rpm
High Idle - 2995 ± 25 rpm
Operating Range - 1700-2800 Engine rpm
Injection Pump Timing - 17.0 ± 1.0° BTDC
Battery - 12V, 52 Ah
Alternator - 12V, 43 Amp
Starter - 12V, 1.2 kW

JD 3036E Transmission

Standard Transmission Type - Sync Reverser
Gears - Constant mesh in speed and range
Clutch type - Single Dry traction Clutch
Forward gears - 8
Reverse gears - 8
Optional Transmission Type - 2 Range Hydrostatic
Forward-Reverse High Speed - 0-22.7 km/h (0-14.1 mph)
Forward-Reverse Low Speed - 0-10.6 km/h (0-6.6 mph)

Power Take-off

Rear PTO - Independent
PTO speed - 540 PTO @ 2500
PTO ERPM - 540E PTO @ 1925 ERPM
Max PTO Power - 21 kW (28.5 hp)

John Deere 3036E Mechanical

Mechanical Front Wheel Drive - Standard
MFWD Capability - All Ranges
MFWD Engagement - On The Go
Steering - Power Steering
Brakes Type - Wet Disc Brakes
Brakes Actuation - Mechanical
Final Drive Type - Spur Gear
Rear Axle Capacity - 1200 kg (2640 lb)
Front Axle Capacity - 800 kg (1760 lb)

JD 3036E Hydraulics and Hitch

PumpType - Tandem Gear
Hydrostatic Pump Type - PV Axial Piston
Implement and Steering Pump Type - Dual Gear
Working Pressure - 17238 kPa (2500 psi)
Charge Pressure - 800 kPa (116 psi)
Loop Pressure - 34.5 MPa (5004 psi)
Implement Pump Flow @ Max Speed - 20.2 L/min (5.3 gpm)
Power Steering Pump Flow @ Max Speed - 15 L/min (4 gpm)
Total Pump Flow - 35.2 L/min (9.3 gpm)
3-Point Hitch Type - Limited Category 1
Lifting capacity Hitch Ball - 910 kg
Lifting capacity 61 cm (24 in.) behind link arms - 615 kg (1356 lb)

Wheels and Tires

Front Treads Width - 1089 mm (42.9 in.)
Rear Treads Width - 1089 mm (42.9 in.)
Front Tires - 8.0x16, 4PR
Front Tires - 25x8.5-14, 6PR R4
Rear Tires - 12.4x24, 4PR
Rear Tires - 12.4x24, 8PR
Rear Tires - 15.00-19.5, 6PR R4

Filling capacities

Fuel tank - 38.5 L
Engine sump - 3.9 L
Transmission/Hydraulics - 33 L
Coolant - 5.3 L
Front Axle - 3.8 L

John Deere 3036E Attachments

305 Loader

Height (to pin) - 2160 mm (85.1 in.)
Dump reach - 620 mm (24.7 in.)
Dump angle - 45 degree
Rollback angle - 30 degree
Breakout force (at pin) - 811 kg (1788 lbs)
Lift to full height (at pin) - 531 kg (1171 lbs)

D160 Loader

Lift capacity at pivot pin (max. height), kg (lb) - 531 (1171)
Maximum lift height at pivot pin, mm (in) - 2162 (85.1)
Reach at max. height, mm (in) - 627 (24.7)
Breakout force at pivot pin, kg (lb) - 811 (1788)
Dump Angle, deg - 45
Rollback Angle, deg - 30
Loader Raising Time, sec - 2.78
Loader Lowering Time, sec - 2.5
Bucket Dump Time, sec (regen) - 1.5
Bucket Rollback Time, sec - 1.55

JD 3036E Dimensions and Weight

Wheel base - 1574 mm
Overall length (Without Front Weight) - 2919 mm
Overall length (With Front weight) - 3280 mm
Overall Width - 1455 mm
Overall height (With Exhaust Pipe) - 2105 mm
Overall height (With ROPS) - 2320 mm
Ground clearance - 290 mm
Turning radius with brake - 2500 mm
Turning radius without brake (Light Duty Front Axle) - 2800 mm
Turning radius without brake (Heavy Duty Front Axle) - 2830 mm
Track Width Front (Light Duty Front Axle) - 1111 mm
Track Width Front (Heavy Duty Front Axle) - 1151 mm
Track Width Rear - 1130 mm
Total weight (Light Duty Front Axle) - 1233 Kg
Total weight (Heavy Duty Front Axle) - 1276 Kg
Maximum vertical load - 400 daN