________________________________________________________________________________

John Deere 5105M Specs

JD 5105M Engine Specifications

Advertised Engine Power, Rated, hp (kW) - 105 (78.3)
Maximum Engine Power, hp (kW) - Same as Advertised
Rated Engine Speed, rpm - 2100
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 30.3 (115) OOS / 40.7 (154) Cab
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Engine Make - John Deere
Engine Model - 4045
Number of Cylinders - 4
Displacement, cu in (L) - 276 (4.5)
Engine Bore, in (mm) - 4.17 (106)
Engine Stroke, in (mm) - 5.0 (127)
Block Design, Replaceable Liners - Wet liners
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged
Fuel System Description - Rotary-Distributor Type
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 70 (OOS) / 90 (Cab)

Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 90 (78.3)
PTO Speeds, rpm - 540 / 540E
PTO operational Type (Independent; Live; Continuous) - Independent

John Deere 5105M Transmission

Manufacturer's Description - 16F / 16R PowrReverser
Transmission Type - Gear
Number of Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 23.68 (37.9)
Creeper Range Available - Yes
Shuttle (Forward-Reverse) Available - Yes / Clutch Not Required

Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 85.75 (2178)
Front Tire Size, 2WD - No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track - 12.4R24 R1
Rear Tire Size or Track Width - 480/80R30 R1W

JD 5105M Axles and Brakes

Final Drive Location and Description - Planetary / Inboard
Rear Axle Output End, Flange or Bar - Flange
Rear Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet Disk

Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 24.7 (93.6)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 2 Rear; 2 Mid-mount

John Deere 5105M Hitch

3-Point Hitch Category - Category 2 Convertible to 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Lower Link
Draft Link Ends Telescopic - Std
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 4,498 (2041)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Swinging

Dimensions and Weights

Length, 2WD, incl. Hitch/Drawbar, in (mm) - No 2WD
Height to Top of Cab, in (mm) - 100
Weight, 2WD w/ROPS, lb (kg) - No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) - 7,300 (3311)
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 8,400 (3810)

JD 5105M Attachments

John Deere 553 Loader

Height (to pin) - 123 inches (312 cm)
Clearance, dumped bucket - 95 inches (241 cm)
Dump reach - 40 inches (101 cm)
Dump angle - 43
Reach at ground - 71 inches (180 cm)
Rollback angle - 31
Breakout force (at pin) - 5,537 lbs (2511 kg)
Lift to full height (at pin) - 2,917 lbs (1323 kg)