________________________________________________________________________________

John Deere G110 Specs

JD G110 Engine Specifications

Engine Manufacturer - Kohler
Engine Model Number - CV730S
Engine type - 4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block
Horsepower - 18.6 kW (25 hp)
Engine RPM - 3600
Displacement - 725 cc (44.2 cu in.)
Bore - 83 mm (3.3 in.)
Stroke - 67 mm (2.6 in.)
Ignition Module Air Gap - 0.20-0.30 mm (0.008-0.012 in.)
Intake and Exhaust Valve Clearance - Not Applicable (Engine Uses Hydraulic Lifters)
Spark Plug-Gap - 0.76 mm (0.030 in.)
Spark Plug-Torque 24.4-29.8 Nm (18-22 lb-ft)
Cylinders - Two
Stroke/Cycle - Four
Lubrication - Full-Pressure
Oil Filter - Yes
Air Cleaner - Dual Stage
Crankcase without oil filter - 1.8 L (1.9 qt)
Crankcase with oil filter - 1.9 L (2 qt)
Fuel - 7.9 L (2.1 gal)
Hydraulic Valve - Lifter to Crankcase Running Clearance - 0.0241/0.0501 mm (0.0009/0.0020 in.)
Intake Valve Stem-to-Valve Guide Running Clearance - 0.038/0.076 mm (0.0015/0.0030 in.)
Exhaust Valve Stem-to-Valve Guide Running Clearance - 0.050/0.088 mm (0.0020/0.0035 in.)
Intake Valve Guide I.D. Max. Wear Limit - 7.134 mm (0.2809 in.)
Exhaust Valve Guide I.D. Max. Wear Limit - 7.159 mm (0.2819 in.)
Valve Guide Reamer Size Standard - 7.048 mm (0.2775 in.)
Intake Valve Minimum Lift - 8.07 mm (0.3177 in.)
Exhaust Valve Minimum Lift - 8.07 mm (0.3177 in.)

Electrical System

Charging System - Regulated Circuit
Charging System Capacity - 16 Amp
Battery Voltage - 12 Volts
Battery Type - BCI Group U1

John Deere G110 Drive Train

Transmission - Transaxle Tuff Torq K66
Transmission Type - Belt-driven hydrostatic
Gears - Iinfinite forward and reverse
Reduction Ratio - 37.22:1
Axle Torque (rated) (Nm) - 420
Max. tire size (inch) - 23
Brake Capacity (Nm) - @ 300 N 330
Pump/Motor Displacement (cc/min-1) - 10/10
Max. Input Speed (min-1) - 3400
Axle Shaft Size (mm) - 25,4
Max. Static Weight on Axle (kg) - 317
Weight (Dry) (kg) - 23
Brake - Wet disk, internal
Housing (Case) - Aluminum Die Casting
Differential - Automotive Type Bevel Gears
Differential lock - Option
Speed Control System - Foot Control / Hand Control
Auxiliary hydraulic output - Option (For Power Steering, Lift and Others) 6.9L/min, 31bars (450psi) @ 2,000rpm
Bypass Valve - Standard
Oil Reservoir - External Reservoir Oil change - Sealed unit, service not recommended
Mid PTO - Independent
Clutch - Electric
Chassis - 4x2 2WD
Steering - Manual

JD G110 Tires

Size (Front) - 16 x 6.5 - 8
Size (Rear) - 23 x 10.5 - 12
Tire Pressure (Front) - 83 kPa (12 psi)
Tire Pressure (Rear) - 69 kPa (10 psi)

Dimensions

Height - 119 cm (47 in.)
Length (Overall) - 181 cm (71.25 in.)
Width (Machine Only) - 95 cm (37.5 in.)
Width (Machine with 54 Inch Mower) - 169 cm (66.5 in.)
Weight - 263 kg (579 lb)

John Deere G110 Attachments

Mower Deck

Mower Deck - 137 cm (54 in.)
Blades-Rotary - 3
Blade Bolt Torque 82 Nm (60 lb-ft)
Mower Drive Sheave Spindle Torque - 108 Nm (80 lb-ft)
Cutting Height-Approx. - 25-102 mm (1-4 in.)
Cutting Width - 1372 mm (54 in.)

Blade

Blade Type - Front-mount
Width - 46 in. (116 cm)
Lift - Manual
Angle - Manual

Snow blower

42 Inch Snow blower type - front-mount John Deere single-stage with manual lift
Clearing width - 42 in. (106 cm)
43.25 Inch Snow blower type Front-mount single-stage with manual lift
Clearing width - 43.25 in.s (109 cm)
Clearing height - 18 in. (45 cm)
Weight - 180 lbs (81 kg)

JOHN DEERE TRACTORS ATTACHMENTS
420	430	455	790	990
X300	X320	X330	X350	X475
X485	X500	X540	X570	X590
X700	X720	X738	X758	1023E
2025R	2210	2520	3025E	3032E
3038E	3038R	3039R	3046R	3203
3320	3520	4052R	4066R	4100
4105	4115	4200	4310	4320
4400	4410	4520	4600	4720

JD TRACTORS TROUBLESHOOTING
2640	3040	3310	3650	4100
5050D	5090R	5410	6105R	7200R
E130	L111	LA110	LT155	X300R