________________________________________________________________________________

John Deere 5065M Specs

Engine Specifications

Engine Model - John Deere 5030
Number of Cylinders - 5
Displacement, cu in (L) - 186 (3.05)
Engine Bore, in (mm) - 3.39 (86)
Engine Stroke, in (mm) - 4.13 (105)
Block Design, Replaceable Liners - Parent bore
Advertised Engine Power, Rated, hp (kW) - 65 (48.4)
Maximum Engine Power, hp (kW) - Same as Advertised
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 22.3 (84) OOS / 31.0 (117) Cab
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged
Fuel System Description - Electronic Unit Pump System
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 2
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 70 (OOS) / 90 (Cab)

John Deere 5065M PTO

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 50 (37.3)
PTO Speeds, rpm - 540 / 540E
PTO operational Type (Independent; Live; Continuous) - Independent

JD 5065M Basic Transmission

Manufacturer's Description - 16F / 16R SyncReverser
Transmission Type - Gear
Number of Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 23.68 (37.9)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Yes / Clutch Required

Optional Transmissions

Manufacturer's Description - 12F / 4R SyncShuttle Plus
Transmission Type - Gear
Number of Forward / Reverse Speeds - 12F / 4R

Manufacturer's Description - 16F / 16R PowrReverser
Transmission Type - Gear
Number of Forward / Reverse Speeds - 16F / 16R

John Deere 5065M Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 2WD / 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - 85.63 (2175)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 85.75 (2178)
Front Tire Size, 2WD - 7.50-16 6PR
Front Tire Size orTrack Width, MFD/4WD or Track - 11.2-24 8PR
Rear Tire Size or Track Width - 16.9-30 6PR

Axles and Brakes

Final Drive Location and Description - Planetary / Inboard
Rear Axle Output End, Flange or Bar - Flange
Rear Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet Disk

JD 5065M Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 19.4 (73.6)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 2 Rear; 2 Mid-mount

3-Point Hitch

3-Point Hitch Category - Category 2 Convertible to 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Lower Link
Draft Link Ends Telescopic - Std
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 3,595 (1631)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 4,498 (2041)
Standard Lift Capacity at lift pin, lb (kg) - np
Optional Lift Capacity at lift pin, lb (kg) - np
Drawbar Description - Swinging

John Deere 5065M Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - np
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - np
Height to Top of Cab, in (mm) - np
Height to Top of ROPS raised, in (mm) - np
Overall Width, with standard wheels or tracks, in (mm) - np
Weight, 2WD w/ROPS, lb (kg) - 6,000 (2721)
Weight, MFD/4WD w/ROPS, lb (kg) - 6,400 (2902)
Weight, 2WD w/Cab, lb (kg) - 7,400 (3357)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 7,801 (3538)
Weight, Total allowable, w/maximum ballast, lb (kg) - np