________________________________________________________________________________

John Deere X360 Specs

JD X360 Engine Specifications

Engine Make - Kawasaki iTorque Power System
Engine Model - Kawasaki FS651V
Engine Type - 4-stroke, OHV, V-twin 90°
Max. horsepower - 19.2 PS (14.1 KW; 18.8 HP) at 3,600 rpm / 22.3 PS (16.4 KW; 22.0 HP) at 3,600 rpm
Max. torque (crank PTO) - 53.2 Nm (5.4 kgm; 39.3 ft-lb) at 1,800 rpm / 53.3 Nm (39.3 ft-lb) at 2,000 rpm
Bore - 78 mm (3.07 in.)
Stroke - 76 mm (2.99 in.)
Displacement - 726 cm3 (44.3 cu in.)
Cylinders - 2 (V-Twin)
Cycle - Four
Engine Maximum speed - 3500 ± 100 rpm
Idle speed - 1500 ± 100 rpm
Cylinder compression - 4.5 kg/cm2 (64 psi) at 500 rpm
Fuel Filter - Replaceable paper element
Fuel Pump - Pulse
Fuel Delivery - Carburetor
Carburetor - Internally vented with fuel shut-off solenoid
Fuel Capacity - 12.5 L (3.3 gal)
Lubricating system - Full pressure with spin-on oil filter
Oil type - 4-stroke or an equivalent (SJ or higher class)
Recommended oil - SAE 10W-40, 10W-30
Oil capacity (with filter changed) - With oil filter 2.1 litre / Without oil filter 1.8 litre
Cooling system - Air-cooling
Cooling system - Pressurized forced circulation type
Ignition system - Electronic spark ignition
Spark plug - NGK: BPR4ES
Spark plug gap - 0.7-0.8 mm (0.027-0.031 in)
Ignition coil air gap - 0.2-0.4 mm (0.008-0.011 in)
Spark plug tightening torque - 22 Nm; 2.2 kgm; 16.2 ft-lb
Starting system - Bendix type starter
Charging system - 13A or 20A charge coil (option)
Battery Type - 12 Volt
Cold Cranking Capacity - 195 Amps
Cylinder head torque - 46 Nm; 4.6 kgm; 33.9 ft-lb
Connecting rod torque - 10 Nm; 1.0 kgm; 7.4 ft-lb
Flywheel torque - 56 Nm; 5.7 kgm; 41.3 ft-lb
Crankcase cover torque - 27.5 Nm; 2.75 kgm; 20.3 ft-lb
Intake manifold - 9 Nm; 0.9 kgm; 6.6 ft-lb
Oil drain plug - 7 Nm; 0.7 kgm; 5.2 ft-lb
Valve clearance lock nut - 11 Nm; 1.1 kgm; 8.1 ft-lb
Intake valve clearance - 0.10-0.15 mm (0.004-0.006 in)
Exhaust valve clearance - 0.10-0.15 mm (0.004-0.006 in)

John Deere X360 Transmission

Transmission - Variable Speed Hydrostatic
Transaxle - Kanzaki, Tuff Torq K58
Reduction Ratio - 31.44:1
Axle Torque (rated) (Nm) - 294
Max. tire size (inch) - 23
Brake Capacity (Nm) - @13.9 N Brake Arm Force 470
Pump/Motor Displacement (cc/min-1) - 7/10
Max. Input Speed (min-1) - 3400
Axle Shaft Size (mm) - 25.4
Max. Static Weight on Axle (kg) - 285
Weight (Dry) (kg) - 15.3
Brake - Wet disk, internal
Housing (Case) - Aluminum Die Casting
Differential - Automotive Type Bevel Gears
Speed Control System - Foot Control / Hand Control
Bypass Valve - Std
Oil Reservoir - Std
Forward Speeds at Full Engine RPM - 0-10.0 km/h (0-6.2 mph)
Reverse Speeds at Full Engine RPM - 0-5.6 km/h (0-3.5 mph)

JD X360 Tires

Front Tire - 15x6.50-8
Rear Tire - 22x11.00-10
Front Tire Inflation - 97 kPa (14 psi)
Rear Tire Inflation - 69 kPa (10 psi)

John Deere X360 Dimensions

Height - 1090 mm (43 in.)
Overall Width (without mower deck) - 1040 mm (41 in.)
Length (Overall) - 1730 mm (72 in.)
Weight (Tractor without mower deck) - 249 kg (548 lb)
Weight (Tractor with 48XRW mower deck) - 309 kg (681 lb)

John Deere X360 Attachments

48-inch Edge Xtra Mower

Cutting Width - 1220 mm (48 in.)
Blades-Rotary - 3
Blade Bolt Torque - 68 Nm (50 lb-ft)
Cutting Height (Approximately) - 25-102 mm (1-4 in.)
Weight - 60 kg (133 lb)

54-inch Edge Xtra Mower

Cutting Width - 1.37 m (54 in.)
Blades-Rotary - 3
Blade Bolt Torque - 68 Nm (50 lb-ft)
Cutting Height (Approximately) - 25-102 mm (1-4 in.)
Weight - 69 kg (153 lb)

JOHN DEERE TRACTORS ATTACHMENTS
420	430	455	790	990
X300	X320	X330	X350	X475
X485	X500	X540	X570	X590
X700	X720	X738	X758	1023E
2025R	2210	2520	3025E	3032E
3038E	3038R	3039R	3046R	3203
3320	3520	4052R	4066R	4100
4105	4115	4200	4310	4320
4400	4410	4520	4600	4720

JD TRACTORS TROUBLESHOOTING
2640	3040	3310	3650	4100
5050D	5090R	5410	6105R	7200R
E130	L111	LA110	LT155	X300R