________________________________________________________________________________

John Deere 5075GV Specs

JD 5075GV Engine Specifications

Engine Make - FPT
Engine Model - F5DFL413C-E
Number of Cylinders - 4
Displacement, cu in (L) - 207 (3.4)
Engine Bore, in (mm) - 3.90 (99)
Engine Stroke, in (mm) - 4.33 (110)
Advertised Engine Power, Rated, hp (kW) - 75 (55)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2300
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 22.7 (86)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - 2.7 (10.3)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4 Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - SCR with DEF
Exhaust Gas Recirculation (EGR) - Cooled EGR
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - Passive, automatic
Exhaust Pipe, Vertical stack or Horizontal - Horizontal std; vertical stack opt.
Cooling System Fan Drive Type - Viscous
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 95

Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 61 (45.5)
PTO Speeds, rpm - 540 / 540E
PTO operational Type (Independent; Live; Continuous) - Independent

John Deere 5075GV Transmission

Manufacturer's Description - 12F/12R SyncReverser
Transmission Type - 3 ranges, 4 speeds
Number of Forward / Reverse Speeds - 12F / 12R
Maximum Speed Forward, mph (kph) - 18.6 (30)
Creeper Range Available - See 24F/12R option
Shuttle (Forward-Reverse) Available - Synchronized reverser
Manufacturer's Description - 24F/12R PowrReverser w/Creeper
Transmission Type - Hi-Lo and power reverser
Number of Forward / Reverse Speeds - 24F / 12R

JD 5075GV Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 2WD / 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - 82.6 (2098)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 82.6 (2098)
Front Tire Size, 2WD - 6.00-16 or 6.50-16
Front Tire Size orTrack Width, MFD/4WD or Track - 6.00-16 or 6.50-16
Rear Tire Size or Track Width - 280/85 R28

Axles and Brakes

Final Drive Location and Description - Inboard planetary
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet disk

John Deere 5075GV Hydraulics and Hitch

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Two standard; third optional
Implement Pump Flow, gpm (Lpm) - 17.1 (64.7) plus 7.6 (28.9)
Optional Pump Flow, gpm (Lpm) - 7.6 (28.9) third pump
Number of Standard Remote Valves - 2 std; 3rd or 4th opt.
3-Point Hitch Category - Category 1 or 1N
Optional Hitch Category - No option
Draft Sensing or Lift Control - Center link draft sensing
Draft Link Ends Telescopic - Optional
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 3,593 (1630)
Standard Lift Capacity at lift pin, lb (kg) - 5,290 (2400)
Optional Lift Capacity at lift pin, lb (kg) - 6,700 (3040)
Drawbar Description - Swinging, extendable

JD 5075GV Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - 170 (4319)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 170 (4319)
Height to Top of Cab, in (mm) - 92 (2334)
Height to Top of ROPS raised, in (mm) - 97.2 (2469)
Overall Width, with standard wheels or tracks, in (mm) - 42.8 (1088) minimum; 64.6 (1642) maximum
Weight, 2WD w/ROPS, lb (kg) - 5,379 (2440)
Weight, MFD/4WD w/ROPS, lb (kg) - 5,578 (2530)
Weight, 2WD w/Cab, lb (kg) - 5,853 (2655)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 6,052 (2745)
Weight, Total allowable, w/maximum ballast, lb (kg) - 9,039 (4100)