________________________________________________________________________________

John Deere 7195J Specs

John Deere 7195J Engine Specifications

Engine Type - 6068H Powertech, Diesel
Cylinders - 6 in line
Engine Power at Rated Speed - 143.4 kW (195 cv)
PTO Power at Rated Speed - 122 kW (163 hp.)
Rated Speed - 2100
Aspiration - Turbocharged, Intercooled
Lubrication - Maximum pressure, full flow filter
Displacement - 6.8 L (414 cu. in.)
Bore - 106.5 mm (4.2 in.)
Stroke - 127 mm (5.00 in.)
Compression Ratio - 17.0:1
Low Idle - 875 rpm
High Idle - 2200 rpm
Maximum Torque Speed - 1600 rpm
Maximum Torque - 887 Nm (654 lb-ft.)
Torque Reserve - 36% at 1600 rpm
Fuel Injection Type - High pressure common rail system
Fuel Injection Pump - Denso HP3 (HPCR)
Air Filter - Dry type, with safety element and pre-cleaner
Cooling System Type - Centrifugal Pump, 69 kPa (0.7 bar) (10 psi)
Fan - Fixed Drive
Thermostats - Two, Heavy Duty
Electrical System Type - 12 volts, negative ground
Alternator - 120 A / 200A
Battery - Two batteries, 12 V each
Cold Cranking Amps - 750
Capacity (Ah) - 100 Ah
Terminals and Outputs - 7-pin electrical socket, GreenStar Ready

JD 7195J Power Take-off

PTO Type - Fully independent, Type 1 or 2 shiftable with two or three speeds
PTO Speed 540/1000 rpm - Engine at 1950 rpm
Size - 35 mm (1-3/8 in.)
Clutch - Multiple wet disk operated hydraulically

Transmission

Transmission Type - PowrQuad-Plus (PQ+)
Engagement - Electro-Hydraulic
Number of Gears (forward / reverse) - 16F / 16R
Clutch - Multiple wet disks, adjustable

John Deere 7195J Mechanical

Chassis - 4x4 MFWD 4WD
Differential lock - electro-hydraulic
Steering - hydrostatic power
Service Brake - Wet disks, hydraulically operated and self-adjusting
Park Brake - Transmission lock, controlled by gearshift lever (P position)
Trailer brakes - air brake optional
Cab - Cab standard with air-conditoning

JD 7195J Hydraulics and Hitch

Type - Closed center, power on demand, pump with load sensing
Pump - High pressure, axial piston, pressure/flow compensation
Pump Displacement - 45 cm3 (2.75 cu. in.) or 63 cm3 (3.84 cu. in.)
Maximum Pressure - 21 000 kPa (210 bar) (3046 psi)
Pump Output - 121 L/min. (32 gpm) or 174 L/min. (46 gpm)
Steering - Load-sensing, hydrostatic, flow metering
SCV Control Type - With flow and detent setting
Flow Available in One SCV - 114 LPM (30 gpm)
Number of Standard SCV - 3 SCVs
Number of Optional SCVs - 4 SCVs
3-Point Hitch Category - 3 or 3/3N
Hitch Lift Capacity (Category 3/3N) At 610 mm - 4600 kg (10140 lb.)
Hitch Lift High Capacity (Optional) - 6350 kg (14000 lb)
Lift Points Capacity - 10440 kg (23016 lb.)

Capacities

Fuel Tank - 392 L (103.5 gal)
Cooling System - 28 L (29.6 qt.)
Crankcase, including Filter - 26 L (27.5 qt)
Hydraulic System and Transmission - 108 L (28.5 gal)
Differential Housing (Standard and Heavy Duty) - 14.4 L (15.2 qt)
Differential Housing (3-Meter Axle) - 18.8 L (19.9 qt.)
Wheel Hubs (Standard and 3 Meter Axles) - 3.81 L (4 qt.)
Wheel Hubs (Heavy Duty Axle) - 3.81 L (4 qt.)

John Deere 7195J Dimensions and Weight

Front Tires - 16.9-30
Rear Tires - 20.8-42 R1
Wheelbase (mm) - 2860
Center of Rear Axle to Top of Cab (mm) - 2250
Overall Height from Hood to Top of Cab (mm) - 3121
96-in. Axle (mm) - 2438
110-in. Axle (mm) - 2807
Center of Rear Axle to Ground (mm) - 673
Drawbar to Ground (mm) - 517
Overall Length without Front Weights, with Weight Bracket and Hydraulic Hitch (mm) - 5587
Overall Length with Front Weights and Hydraulic Hitch (mm) - 6009
Shipping Weight - 8100 kg (17860 lb)
Maximum Weight with Ballast - 11100 kg (24471 lb.)