________________________________________________________________________________

John Deere 6210J Specs

JD 6210J Engine Specifications

Engine - John Deere PowerTech PROCONVE MAR-I
Type - Inline Diesel Engine, 2 valves
Aspiration - Turbocharged with Charge Air Cooler
Number of cylinders - 6
Displacement - 6.8 L
Compression ratio - 17:1
Power at rated speed - 154.5 kW (210 hp)
Engine rated speed - 2100 rpm
Engine maximum speed - 2250 rpm
Torque bulge - 25 %
Maximum torque - 878 Nm (647.5 lb-ft)
Speed at maximum torque - 1550 rpm
Fuel System Type - Electronic with fuel system malfunction warning light
Fuel Pump - High-Pressure Common Rail (HPCR)
Fuel Transfer Pump - Electric fuel transfer pump
Filtering System - Two-stage with water separator and Water-in-Fuel Sensor
Electrical System - 12 V
Alternator Capacity (with standard lights) - 90 A
Alternator Capacity (with premium lights) - 120 A
Battery Type - Sealed (unserviceable)
Battery Capacity - 12 V - 150 Ah
Starter Motor - 4 kW
Lights - Economic-Halogen

Power Take-Off

PTO Type - Independent
Actuation - Electro-Hydraulic
PTO Power at Engine Rated Speed - 131 kW (175 hp)
PTO Rated Speed - 540/1000 rpm
Engine Speed at PTO Rated Speed - 2100 rpm

John Deere 6210J Transmission

Model - PowrQuad
Transmission Type - Planetary gears, hydraulic shift
Number of gears - 16 forward and 16 reverse gears
Ground Speed/Reverse - 2.57-31.87/2.69-33.25 km/h
Clutch - Mechanical/hydraulic
Clutch Type - Multidisc oil cooled
Actuation - Auto-adjustable hydraulic
No. of disks - 5
Diameter of disks - 225 mm (8.85 in.)

JD 6210J Axles and Brakes

Front Axle - 4x4 Standard
Optional - 4x4 John Deere 3 Meters Front Axle
Front Axle Differential Lock - Automatic
Limited Slip - Yes
Supension - No
Maximum Speed - 30 km/h (18.6 mph)
Rear Axle - Rack and Pinion
Rear Axle Differential Lock - Hydraulic
Service Brake Type - Disk in oil bath
Actuation - Auto-adjustable, hydraulically actuated
Park Brake Type - Transmission lock
Actuation - Controlled by reverse drive lever
Air Trailer Brake - Optional
Actuation - Compressed air

John Deere 6210J Hydraulics and Hitch

Type - Closed center, pressure-and-flow compensated (PFC)
Hydraulic Pump - Piston Pump
Pump flow rate - 110 L/min (26.4 gpm)
Maximum pressure - 200 bar (2900 psi)
Standard Hitch - Category 3, ball joint type
Optional Hitch - Unavailable
Maximum Lifting Force - 4800 kgf (10582 lbf)
Lifting capacity at 610 mm (2 ft) of hitch - 4800 kgf (10582 lbf)
Control type - Electronic, with sensors in lower hitch arms
Standard selective control valves - Two basic SCV
Optional selective control valves - Two deluxe SCV and one basic SCV
Optional selective control valve flow rate - 100 L/min (26.4 gal/min)

JD 6210J Capacities

Fuel Tank - 372 L (98.27 gal)
Cooling System - 25.5 L (6.7 gal)
Engine Oil (with filter) - 20 L (5.28 gal)
Transmission/hydraulic System - 68 L (17.96 gal)
Standard Front Axle Differential Housing - 8.2 L (2.16 gal)
Standard Front Axle Final Drive Housing (each) - 1.8 L (0.475 gal)
John Deere 3 Meters Front Axle Differential Housing - 22.4 L (5.91 gal)
John Deere 3 Meters Front Axle Final Drive Housing (each) - 3.78 L (1 gal)

John Deere 6210J Dimensions and Weights

Front Tires - 600/65R28 R1 10B 147A8 STD
Rear Tires - 710/70R38 R1 166A8
Wheel Base (Standard Axle) - 2688 mm (105.8 in)
Wheel Base (John Deere 3 Meters Front Axle) - 2807 mm (110.4 in)
Total Length with Front Weights - 5020 mm (197.6 in)
Maximum Height - 3031 mm (1197.3 in)
Width of the Front Axle (flange to flange) Standard Axle - 1780 mm (70 in)
Width of the Front Axle (flange to flange) John Deere 3 Meters Front Axle - 2931 mm (115 in)
Width of the Rack and Pinion Rear Axle (Short Axle) - 2438 mm (96 in)
Width of the Rack and Pinion Rear Axle (Long Axle) - 2794 mm (110 in)
Maximum Permissible Front Axle Load - 5000 kg (9920 lb)
Maximum Permissible Rear Axle Load - 9500 kg (20943 lb)
Maximum Ballasted Weight - 11750 kg (25904 lb)
Maximum Permissible Weight - 12300 kg (27116 lb)