________________________________________________________________________________

John Deere 4100 Specs

John Deere 4100 Engine Specifications

Engine Make - Yanmar
Engine Model - 3TNE74
Type - Vertical, 4-cycle water cooled diesel engine
Engine Horsepower - 14.9 kW (20 hp)
Combustion system - Special swirl precombustion chamber
No. of cylinders - 3
Bore x Stroke mm - 74x78
Displacement - 1.006
Firing order - 1-3-2-1
Rated Engine Speed - 2650 rpm
Speed, Fast Idle - 2860 rpm
Speed, Slow Idle - 1025 rpm
Direction of rotation - Counterclockwise (viewed from flywheel)
Power take off - Flywheel
Compression ratio - 23.0
Fuel injection timing (FlD, b.T.D.C.), deg - 14±1
Compression pressure, MPa - 3.43 at 250 rpm
Fuel injection pressure, MPa - 11.8
Recommended diesel gas oil - ISO 8217 DMA, BS 2869 Alar A2
Lubrication system - Forced lubrication with trochoid pump
Lubricating oil capacity, L (Max/Effective) - 2.4/1.0
Recommended lubricating oil - API grade CC class or higher
Cooling system - Liquid cooling / Radiator
Cooling water capacity, L - 0.9 (for engine only)
Fuel tank - 22 L (5.8 gal)
Crankcase with filter - 2.2 L (2.3 qt)
Cooling fan (No. of blade x dia.) - Pusher type, 5x310 mm
Governor - Mechanical centrifugal
Starting system - Electrical
Electrical System Type - 12 Volt
Battery Size - 433 Cold Cranking Amps @ -18°C (0°F)
Alternator - 20 amp
Fuel Filter - Replaceable Element
Fuel Pump - In-line with Electric Shutoff
Fuel Delivery - Indirect Injection-Self Bleeding

John Deere 4100 Drivetrain

Transmission - Hydrostatic 2-Range (HST)
Number of Speeds - Infinite Forward, Infinite Reverse
Transmission - 8x4 Sliding Gear/Collar Shift
Number of Speeds - 8 Forward, 4 Reverse
Clutch Type (Hydrostatic) - Hydraulic Multi-Disk
Clutch Type (Gear) - Single Stage Dry
Final Drive - Spur Gear
Brakes - Wet Disk
Steering - Power Steering
Mechanical Front Wheel Drive (MFWD) - Standard
Front Axle Operating Capacity - 450-500 kg (992-1102 lb)
Rear Axle Operating Capacity - 900-1000 kg (1984-2205 lb)

John Deere 4100 Hydraulics and Hitch

Hydraulic System Type - Open center
Hydraulic System Capacity (Gear) - 10.5 L (2.5 gal)
Hydraulic System Capacity (HST) - 12.5 L (3.3 gal)
Pressure - 2418 psi (166.7 bar)
Total flow - 5.1 gpm (19.3 lpm)
3-Point Hitch Type Category - 1
Lift Capacity 61 cm (24 in.) behind link arms - 422 kg (930 lb)
Drawbar Tongue Weight Capacity - 259 kg (570 lb)

JD 4100 Power Take-Off

PTO Type - Independent
PTO Horsepower - 11.9 kW (16 hp)
Speed-Mid PTO rpm @ 2650 engine RPM (HST) - 2117 rpm
Speed-Rear PTO rpm @ 2650 engine RPM (HST) - 545 rpm
Speed-Mid PTO rpm @ 2650 engine RPM (Gear) - 2139 rpm
Speed-Rear PTO rpm @ 2650 engine RPM (Gear) - 551 rpm
Brake Type (Hydrostatic) - Hydraulically Engaged Mid and Rear PTO Brake
Brake Type (Gearl) - Mid PTO Brake and ORC Clutch on Rear PTO

Tire Sisez and Inflation Pressures

Front Tires 5.00-12 4PR R1, Pressures (Loaded/Unloaded), kPa - 200/120
Front Tires 23x8.50-12 4PR R3, Pressures (Loaded/Unloaded), kPa - 160/150
Front Tires 23x8.50-12 6PR R4, Pressures (Loaded/Unloaded), kPa - 150/83
Front Tires 5-12 4PR R1, Pressures (Loaded/Unloaded), kPa - 234/140
Rear Tires 9.5-16 4PR R1, Pressures (Loaded/Unloaded), kPa - 140/140
Rear Tires 315x75D-15 4PR R3, Pressures (Loaded/Unloaded), kPa - 100/100
Rear Tires 12.00x16.5 6PR R4, Pressures (Loaded/Unloaded), kPa - 280/83
Rear Tires 8.00-16 6PR R1, Pressures (Loaded/Unloaded), kPa - 234/100

John Deere 4100 Attachments

410 Loader

Height (to pin) - 74 inches (187 cm)
Clearance, dumped bucket - 55.1 inches (139 cm)
Dump reach - 24.8 inches (62 cm)
Dump angle - 45
Reach at ground - 44.6 inches (113 cm)
Rollback at ground - 25
Rollback, raised - 64
Breakout force (at pin) - 2,257 lbs (1023 kg)
Breakout force (bucket) - 1,661 lbs (753 kg)
Lift to full height (at pin) - 882 lbs (400 kg)
Lift to full height (at 500mm) - 618 lbs (280 kg)
Lift to 1.5m (at pin) - 1,072 lbs (486 kg)
Lift to 1.5m (at 500mm) - 781 lbs (354 kg)
Bucket width - 49.2 inches (124 cm)
Raise time to height - 2.5s
Bucket dump time - 2.0s
Lowering time - 1.8s
Rollback time - 1.9s

JD 4100 Dimensions and Weight

Wheelbase - 1473 mm (58.0 in)
Overall Length with 3-point Hitch - 2616 mm (103.0 in)
Overall Width (min./max.) - 1093 mm (43.0 in) / 1211 mm (47.6 in)
Overall Width (Narrow) - 914 mm (36.0 in)
Inside Width (min./max.) 607 mm (23.9 in) / 725 mm (28.5 in)
Inside Width (Narrow) - 534 mm (21.0 in)
Height From Ground To Top of Hood - 1108 mm (43.6 in)
Height From Ground To Top of ROPS - 2003 mm (78.9 in)
Height From Ground To Top of Hood (Narrow) - 1092 mm (43.0 in)
Height From Ground To Top of ROPS (Narrow) - 1975 mm (77.8 in)
Ground Clearance, Front Axle - 323 mm (12.7 in)
Ground Clearance, Front Axle (Narrow) - 307 mm (12.1 in)
Weight (Gear) - 688 kg (1517 lb)
Weight (HST) - 710 kg (1565 lb)
Weight (Narrow) - 866 kg (1907 lb)