________________________________________________________________________________

John Deere 9510R Tractor Spec

9510R John Deere Engine Specifications

Engine Make - John Deere
Engine Model - PSX 13.5 L
Number of Cylinders - 6
Displacement, cu in (L) - 824 (13.5)
Engine Bore, in (mm) - 5.2 (132)
Engine Stroke, in (mm) - 6.5 (165)
Block Design, Replaceable Liners - Wet liners, replaceable
Aspiration, Turbocharged or Naturally Aspirated - Dual stage turbochargers, aftercooled

Engine Performance

Advertised Engine Power, Rated, hp (kW) - 510 (375 )
Maximum Engine Power, hp (kW) - 561 (413)
Rated Engine Speed, rpm - 2100
Power Boost, hp (kW) - 51 (38)
Fuel Tank capacity, gal (L) - 350 (1325)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF

Fuel System, Emission and Exhaust Treatment

Fuel System Description - Unit Injector System
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber - Direct
Emission Level, US EPA Tier - Tier 4 Interim
Exhaust Gas Recirculation (EGR) - Cooled EGR standard
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - DPF standard
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack

Cooling and Electrical System

Fan Drive Type - Variable ratio belt sheaves
System Rating, Volts - 12
Alternator Rating, Amps - 200

JD 9510R Tractor Transmission

Manufacturer's Description - 18-speed PowerShift
Transmission Type - Full power shift
Number of Forward / Reverse Speeds - 18F / 6R
Maximum Speed Forward, mph (kph) - 25 (40)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Yes

John Deere 9510RT PTO

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 319 (238)
Power Take Off Speeds, rpm - 1000 rpm, 1.75 (44) 20 spline
PTO operational Type - Independent

Wheel Configuration

Drive Wheels - 4WD
Steering Configuration - Frame Articulated

Rear and Front Axles

Final Drive Location and Description - Inboard planetary, double reduction
Rear Axle Output End, Flange or Bar - Bar
Axle Bar Diameter, in (mm) - 4.72 (120)
Suspended Front Axle Available - No
Service Brake Type - Wet disc

John Deere 9510R Hydraulic System

Hydraulic System Type - Closed-center, pressure flow compensated
Main Hydraulic Pump Type - Two pumps for 78 gpm
Implement Pump Flow, gpm (Lpm) - 48 (182)
Optional Pump Flow, gpm (Lpm) - 78 (295)
Number of Standard Remote Valves - 4 std; 5 or 6 opt

JD 9510RT Hitch and Drawbar

3-Point Hitch Category - Category 3/4N
Optional Hitch Category - Category 4/4N
Draft Sensing or Lift Control - Draft and wheel slip sensing
Draft Link Ends Telescopic - Quick coupler
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 15,300 (6940)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 20,000 (9072)
Drawbar Description - Category 5, Swinging

Wheelbase and Tires

Wheelbase, MFD/4WD or Track, in (mm) - 138 (3500)
Front Tire Size orTrack Width, MFD/4WD or Track - 800/70 R38 Duals
Rear Tire Size or Track Width - 800/70 R38 Duals

Dimensions and Weight

Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 295 (7495)
Height to Top of Cab, in (mm) - 145 (3681)
Overall Width, with standard wheels or tracks, in (mm) - 187 (4762)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 41,540 (18842)
Weight, Total allowable, w/maximum ballast, lb (kg) - 60,000 (27216)