________________________________________________________________________________

John Deere E120 Specs

John Deere E120 Engine Specifications

Engine Model - Briggs and Stratton 40
Engine Configuration - Vertical
Power HP (gross) - 16.0
Bore (in) - 2.97
Stroke (in) - 2.89
Compression Ratio - 8.5:1
Ignition System - Electronic
Displacement - 656 cc (40 cu. in.)
Spark Plug Gap - 0.76 mm (0.030 in)
Spark Plug Torque - 20 Nm (15 lb·ft)
Cylinders - Twin
Oil Filter - John Deere Easy Change 30-Second Oil Change System
Length (in) - 19.30
Height (in) - 15.70
Weight (lbs) - 84
Width (in) - 17.60
Oil Capacity (oz) - 64
Air Cleaner - Integral Cyclonic Air Filter
Lubrication System - Full Pressure Lubrication with Oil Filter

John Deere E120 Transmission

Transmission Type - Hydrostatic
Transaxle Model - Tuff Torq TL-200
Reduction Ratio - 21.53:1
Axle Torque (Rated) - 177.7 Nm (131 lb-ft)
Max. Tire Diameter - 457 mm (18 in)
Brake Capacity - 253 Nm (187 lb-ft) @350 N (79 lb) Brake arm force
Displacement (Pump/Motor) - 7/10 cc/rev
Max. Input Speed - 3,000 rpm
Axle Shaft Size - 19.05 mm (0.75 in)
Weight (dry) - 12.5 kg (27.6 lb)
Brake Type - Wet Disc, Internal
Housing (Case) - Aluminum Die-Cast
Gears - Heat-treated Powder Metal
Differential - Automotive-type Bevel Gears
Speed Control System - Foot Control and Hand Control
Bypass Valve (Roll Release) - Standard
Hydraulic fluid type - Proprietary Tuff Torq Tuff Tech drive fluid recommended
Travel Speed (Forward) - 0-8,9 km/h (0-5,5 mph)
Travel Speed (Reverse) - 0-5,2 km/h (0-3,2 mph)

Electrical System

Charging System - Regulated Circuit
Charging System Capacity - 9 Amp
Battery Voltage - 12 Volts
Battery Type - BCI Group U1

JD E120 Tires

Size (Front) - 15 x 6.00 - 6
Size (Rear) - 20 x 8.0 - 8
Tire Pressure (Front) - 97 kPa (14 psi)
Tire Pressure (Rear) - 69 kPa (10 psi)

John Deere E120 Dimensions

Height - 1,13 m (45.5 in.)
Length (Overall) - 1,75 m (68.75 in.)
Width (Mower Deck Chute Down) - 1,38 m (54.4 in.)
Wheelbase - 48.9 in. (1,24 m)
Weigh - 198 kg (436 lb)

JD E120 Attachments

42 Inch Side Discharge Mower Deck

Cutting width - Edge mower deck, 42 in. (107 cm)
Construction - Stamped steel deck shell
Mower deck material - Steel, 13 gauge
Wash port - Yes
Drive system - Manual power take-off (PTO)
Mower wheels - Two
Mower wheel adjustment - One bolt
Level adjustment - Easy-level deck
Mower Attach Type - Slide under tractor
Front draft arms - One spring clip
Rear draft arms - Two spring clips
Wheels rotate - Not equipped
Drive system - Single belt

42 Inch Mower Deck

Blades Rotary - 2
Blade Nut Torque (w/5/8 in. Nut) - 88 Nm (65 lb-ft)
Cutting Height (Approximately) - 2.5-10.2 cm (1-4 in)
Cutting Width - 1,07 m (42 in)

48 Inch Mower Deck

Blades Rotary - 3
Blade Nut Torque (w/5/8 in. Nut) - 88 Nm (65 lb-ft)
Cutting Height (Approximately) - 2.5-10.2 cm (1-4 in)
Cutting Width - 1,22 m (48 in)

44 Inch Snow blower

Type - Front-mount John Deere two-stage
Clearing width - 44 inches (1,11 m)

JOHN DEERE TRACTORS ATTACHMENTS
420	430	455	790	990
X300	X320	X330	X350	X475
X485	X500	X540	X570	X590
X700	X720	X738	X758	1023E
2025R	2210	2520	3025E	3032E
3038E	3038R	3039R	3046R	3203
3320	3520	4052R	4066R	4100
4105	4115	4200	4310	4320
4400	4410	4520	4600	4720

JD TRACTORS TROUBLESHOOTING
2640	3040	3310	3650	4100
5050D	5090R	5410	6105R	7200R
E130	L111	LA110	LT155	X300R