________________________________________________________________________________

John Deere 2104 Specs

John Deere 2104 Engine Specifications

Engine Manufacturer - John Deere
Engine Type - 6068HYH08
Emission Level - Stage III
Output - Turbo-Intercooler
No. of Cylinders - 6
Displacement - 6.8 L
Bore - 106 mm (4.19 in.)
Stroke - 127 mm (5.0 in.)
Compression - 19:1
Power at rated speed - 155 kW (210 PS)
Slow idle - 850 rpm
Engine rated speed - 2100 rpm
Fast idle - 2250 rpm
Torque bulge - 25%
Maximum torque - 880 Nm (649 lb.-ft)
Speed at maximum torque - 1550 rpm
Injection Pump Type - Rotary
Make / Model - Denso HP3
Starter motor / Make - Bosch
Engine cooling system - water cooled - ethylene glycol or propylene glycol base prediluted (40% to 60%) coolant
Electrical System Voltage - 12 V
Alternator capacity - 90 A
Battery / type - Sealed (unserviceable)
Battery capacity - 150 Ah (cca min. 700 A)

Power Take-off

PTO Type - Independent
Actuation - Electro-Hydraulic
PTO Power - 131.8 KW (cv) (178PS)
Engine speed at - 2100 rpm

JD 2104 Transmission and Clutch

Transmission Type - POWRQUAD
Gears - Planetary gears, hydraulic shift
Number of gears - 16 forward and 16 reverse gears.
Number of gears 20 forward and 20 reverse gears.
Clutch - Mechanical/hydraulic
Clutch Type - Oil cooled
Clutch Actuation - Hydraulic
Number of disks - 5
Diameter of disks - 225 mm (8.85 in)

John Deere 2104 Steering and Brakes

Steering system - Hydrostatic
Maximum pressure of steering - 18500 kPa (185 bar; 2683 psi)
Service brake - disk in oil bath
Parking brake - actuated by gear lever

Hydraulic System

Type - Closed circuit with pilot pressure
Pump - Piston Pump
Pump flow rate - 110 L/min (29.4 gpm)
Maximum pressure - 19500 – 21000 kPa (195 - 210 bar; 2828 - 3045 psi)
Control type - Electronic, with sensors in hitch arms
Selective control valves - 2 or 3
Selective control valve flow rate (100 series) - 60 L/min (15.9 gpm)
Selective control valve flow rate (200 series) - 96 L/min (26.4 gpm)
Lift Cylinder Diameter - 85 mm (3.35 in.)
Sustained Lift Capacity to 610 mm (2 ft) on hitch - 46 KN
3-point hitch type - Category 3
Hitch control - Position control,draft control,position and draft comprehensive control

Wheel and Tires

Front - 420/85R30 (16.9R30)
Front - 420/85R28 (16.9R28)
Rear - 520/85R42 (20.8R42)
Rear - 460/85R42 (18.4R42)

JD 2104 Dimensions

Wheelbase - 2685 mm (105.7 in.)
Total length with front end weights - 5620 mm (221.3 in.)
Maximum Height - 2930 mm (115.35 in.)
Width rear axle (Short) - 2430 mm (95.67 in.)
Width rear axle (Long) - 2800 mm (110.2 in.)
Maximum Width (Short axle) - 2430mm/3200mm (95.66 in./125.97 in.)
Maximum Width (Long axle) - 2800mm/3750mm (110.23 in./147.63 in.)
Front tread MFWD Axle - 1440 - 2108 mm (57 - 83 in.)
Ground clearance (Rear: From ground level to draw bar) - min. 410 mm (16.14 in.)
Ground clearance (Front: From ground level to front wheel drive axle) - min. 523 mm (20.59 in.)

John Deere 2104 Capacities

Fuel Tank - 372 L (81.8 U.S. gal)
Cooling system - 28 L (7.4 U.S. gal)
Engine oil (with filter) - 19.5 L (5.1 U.S. gal)
Transmission - 80 L (21.1 U.S. gal)
Front-wheel drive axle (Standard) - 7.6 L (2 U.S. gal)
Final drives (at front axle), each side - 1.7 L (0.45 U.S. gal)