________________________________________________________________________________

John Deere Sabre 2554HV Specs

John Deere Sabre 2554HV Engine Specifications

Engine Model Kohler - CV25S-69542
Horsepower - 18.6 kW (25 hp)
Displacement - 725 cc (44.0 cu in.)
Bore - 73 mm (2.87 in.)
Stroke - 69 mm (2.7 in.)
Crankcase Capacity with oil filter - 2.0 L (2.1 qt)
Fuel Tank Capacity 11 L (3.0 gal)
Cylinders - Two
Stroke/Cycle - Four
Lubrication - Full-Pressure
Oil Filter - Standard Single Element
Air Cleaner - Dual Stage
Fuel Filter - Replaceable
Spark Plug-Gap - 0.76 mm (0.030 in.)
Spark Plug-Torque - 24.4-29.8 Nm (18-22 lb-ft)
Camshaft Running Clearance - 0.025/0.063 mm (0.0010/0.0025 in.)
Connecting Rod-to-Crankpin Running Clearance - 0.030/0.055 mm (0.0012/0.0022 in.)
Connecting Rod-to-Crankpin Side Clearance - 0.26/0.63 mm (0.0102/0.0248 in.)
Connecting Rod-to-Piston Pin Running Clearance - 0.015/0.028 mm (0.0006/0.0011 in.)
Governor Cross Shaft Bore (6 mm Shaft) - 6.025/6.050 mm (0.2372/0.2382 in.)
Crankshaft to Sleeve Bearing (crankcase) - 0.03/0.09 mm (0.0012/0.0035 in.)
Crankshaft Bore (in oil pan) - 40.987/40.974 mm (1.6136/1.6131 in.)
Flywheel End Main Bearing Journal - 40.913/40.935 mm (1.6107/1.6116 in.)
Connecting Rod Journal - 35.955/35.973 mm (1.4156/1.4163 in.)
T.I.R. PTO End, Crank in Engine - 0.279 mm (0.0110 in.)
Cylinder Bore - 82.988/83.013 mm
Cylinder Head Max. Out-of-Flatness - 0.1 mm (0.004 in.)
Piston-to-Piston Pin Running Clearance 0.006/0.017 mm (0.0002/0.0007 in.)
Hydraulic Valve Lifter to Crankcase Running Clearance - 0.0241/0.0501 mm (0.0009/0.0020 in.)
Intake Valve Stem-to-Valve Guide Running Clearance - 0.038/0.076 mm (0.0015/0.0030 in.)
Exhaust Valve Stem-to-Valve Guide Running Clearance - 0.050/0.088 mm (0.0020/0.0035 in.)
Intake Valve Guide - 7.038/7.058 mm (0.2771/0.2779 in.)
Exhaust Valve Guide - 7.038/7.058 mm (0.2771/0.2779 in.)
Intake Valve Minimum Lift - 8.07 mm (0.3177 in.)
Exhaust Valve Minimum Lift - 8.07 mm (0.3177 in.)

Sabre 2554HV Transmission

Transmission Type - Drive Train Transaxle with foot-controlled variable speed drive
Transaxle Model Tuff Torq, Model K66C
Reduction Ratio - 22.19:1
Axle Torque (rated) (Nm) - 250
Max. tire size (inch) - 23
Brake Capacity (Nm) - @ 300 N 216
Pump/Motor Displacement (cc/min-1) - 10/10
Max. Input Speed (min-1) - 3400
Axle Shaft Size (mm) - 25,4
Max. Static Weight on Axle (kg) - 317
Weight (Dry) (kg) - 23
Brake - Wet disk, internal
Housing (Case) - Aluminum Die Casting
Differential - Automotive Type Bevel Gears
Differential lock - Option
Speed Control System - Foot Control / Hand Control
Bypass Valve - Standard
Oil Reservoir - External Reservoir
Forward Speed - 0-8.8 km/h (0-5.5 mph)
Reverse Speed - 0-3.5 km/h (0-2.5 mph)

John Deere Sabre 2554HV Mechanical

Front PTO - Independent
Clutch - Electric
Chassis - 4x2 2WD
Steering - Manual sector and pinion
Brakes - Disc
Rear Hitch Type - Sleeve hitch

Tire Sizes

Front Tire - 16x7.50
Rear Tire - 24x12.00

Sabre 2554HV Dimensions

Overall Height - 115.7 cm (45.6 in.)
Overall Length - 183.6 cm (72.3 in.)
Wheelbase - 1230 mm (48.5 in.)
Turning Radius - 500 mm (1.7 ft)
Machine Weight - 268 kg (600 lb)

John Deere Sabre 2554HV Attachments

42-inch Snow blower

Type - Front-mount
Clearing width - 42 in. (106 cm)
Lift system - Manual

48-inch Mower Deck

Blades - Rotary 3
Blade Bolt Torque - 84 Nm (62 lb-ft)
Cutting Height-Approx. - 2,5-10,2 cm (1-4 in.)
Blade Length - 42,3 cm (16.6 in.)
Cutting Width - 121,9 cm (48 in.)

54-inch Mower Deck

Blades - Rotary 3
Blade Bolt Torque- 84 Nm (62 lb-ft)
Cutting Height-Approx. - 2,5-10,2 cm (1-4 in.)
Blade Length - 47,4 cm (18.7 in.)
Cutting Width - 137,2 cm (54 in.)

Blade

Type - Front-mount
Width - 46 in. (116 cm)
Lift system - Manual