________________________________________________________________________________

John Deere 2950 Specs

Engine Specifications

Engine - John Deere diesel
Cylinder - 6
Bore/Stroke - 4,19x4,33 inches (106x110 mm)
Air cleaner - two paper elements
Rated RPM - 2500
Starter volts - 12
Coolant capacity - 20 qts (18,9 L)
liquid-cooled - 359 ci (5,9 L)
Fuel - 32,3 gal (122,3 L)
Ground - negative
Charging system - alternator
Charging amps - 55

John Deere 2950 Transmission

Hi-Lo TSS

Type - partial power shift
Gears - 16 forward and 8 reverse
Speeds - With 18,4-34 rear tires

TSS Creeper

Type - partially synchronized
Gears - 12 forward and 8 reverse
Speeds - With 18,4-34 rear tires

JD 2950 Power Take-off (PTO)

Rear PTO - independent
Rear RPM - 540/1000
PTO power (rated engine speed) - 85,37 hp (63,7 kW)
PTO fuel use (engine speed) - 5,4 gal/hour (20,4 l/hour)
PTO fuel use (PTO speed) - 5,2 gal/hour (19,7 l/hour)
Drawbar power (max) - 72,12 hp (53,8 kW)
Drawbar fuel use (max) - 5,3 gal/hour (20,1 l/hour)
Drawbar pull (max) - 8,768 lbs (3977 kg)
Max pull gear - 3-Low

Mechanical

Chassis - 4x2 2WD / 4x4 MFWD 4WD
Differential lock - rear standard
Steering - power
Brakes - differential hydraulic wet disc
Cab - Two-post ROPS, Canopy available, Sound-Gard cab optional with available heat and air-conditioning

John Deere 2950 Hydraulics

Type - closed center
Rear valves - 2
Pump flow - 23 gpm (87)

3-Point Hitch

Rear Type - II
Control - load and depth control
Rear lift - 4,868 lbs (2208 kg)

JD 2950 Dimensions and Tires

Ag front - 10,00-16:18,4-34 (2WD) / 13,6-24,8:18,4-34 (4WD)
Weight (operating) - 10,100 lbs (4581 kg) (4WD cab)
Weight (ballasted) - 11,045 lbs (5010 kg)
2WD Wheelbase - 100,4 inches (255 cm)
4WD Wheelbase - 101,6 inches (258 cm)
Length - 153,2 inches (389 cm)
Height (steering wheel) - 73 inches (185 cm)
Height (cab) - 108,3 inches (275 cm)
2WD Clearance (front axle) - 25,9 inches (65 cm)
4WD Clearance (front axle) - 18,9 inches (48 cm)
2WD turn radius - 14,8 feet (4,5 m) / 12,5 feet (3,8 m) (with brakes)
4WD turn radius - 15,7 feet (4,8 m)

JD 2950 Attachments

JD 148 Loader

Loader type - John Deere 148 (For use on tractors with two-wheel drive)
Weight - 1350 lbs (612 kg)
Height (to pin) - 126 inches (320 cm)
Clearance, dumped bucket - 102 inches (259 cm)
Dump reach - 32 inches (81 cm)
Dump angle - 38
Clearance, level bucket - 121 inches (307 cm)
Rollback angle - 11
Breakout force (lift) - 4700 lbs (2131 kg)
Lift to full height (at pin) - 3100 lbs (1406 kg)
Bucket capacity - 0,5 cu yd (0,4 cu m)
Bucket width - 60 inches (152 cm)

JD 260 Loader

Loader type - John Deere 260
Weight - 2178 lbs (987 kg)
Height (to pin) - 154 inches (391 cm)
Clearance, dumped bucket - 126 inches (320 cm)
Dump reach - 40 inches (101 cm)
Dump angle - 46
Clearance, level bucket - 147 inches (373 cm)
Rollback angle - 42
Breakout force (lift) - 4871 lbs (2209 kg)
Lift to full height (at pin) - 3186 lbs (1445 kg)
Bucket width - 61 inches (154 cm)

JD 265 Loader

Loader type - John Deere 265
Weight - 2619 lbs (1187 kg)
Height (to pin) - 157 inches (398 cm)
Clearance, dumped bucket - 123 inches (312 cm)
Dump reach - 25,6 inches (65 cm)
Clearance, level bucket - 150 inches (381 cm)
Rollback angle - 43
Breakout force (lift) - 5730 lbs (2599 kg)
Lift to full height (at pin) - 3920 lbs (1778 kg)
Bucket width - 73 inches (185 cm)