________________________________________________________________________________

John Deere 4210 Specs

JD 4210 Engine Specifications

Engine Model - Yanmar 3TNE82A
Type - Diesel
Cylinders - 3
Gross Horsepower - 20.2 kW (27.0 hp)
PTO Horsepower (SyncShift Transmission) - 17.5 kW (23.5 hp)
PTO Horsepower (eHydro Transmission) - 16.4 kW (22.0 hp)
Rated Engine Speed - 2600 rpm
Operating Range - 1000-2810 rpm
Engine Torque Rated Speed - 71.0 Nm (52.4 lb-ft)
Compression Ratio - 18.5:1
Lubrication - Pressurized
Cooling System - Water Pump
Oil Filter - Single Element
Air Cleaner - Dry Type with Safety Element
Starting Aid - Air Heater
Electrical System Type - 12 Volt
Battery Size - 500 Cold Cranking Amps at -18C (0F)
Alternator - 40 Amp
High Capacity Alternator - 55 Amp
Starter Size - 1.2 kW (1.6 hp)
Fuel Filter - Replaceable Element
Fuel - Diesel
Fuel Pump - In-Line with Electric Shutoff
Fuel Delivery - Direct Injection, Self Bleeding

John Deere 4210 Power Take-Off

PTO Type - Independent
Clutch Type - Wet Disk
Brake Type - Wet Disk
Speed (Mid-PTO rpm Rated Engine Speed) - 2100 rpm
Speed (Rear PTO rpm Rated Engine Speed) - 540 rpm

JD 4210 Drive Train

Transmission Type - 9x3 SyncShift (2WD and 4WD)
Transmission Type - eHydro (2WD and 4WD)
Number Of Speeds (SyncShift Transmission) - 9 Forward, 3 Reverse
Number Of Speeds (eHydro Transmission) - Infinite Forward, Infinite Reverse
Mechanical Front Wheel Drive Standard - ePowrReverser
Mechanical Front Wheel Drive Optional - eHydro
Capability for MFWD - All Ranges
Rear Final Drive Type - Spur Gear
Differential Lock - Mechanical
Brakes Type - Wet Disk
Main Clutch Disk Type (SyncShift Transmission) - One Mult-Disk Wet Clutch
Main Clutch Disk Diameter (SyncShift Transmission) - 12,4 cm (4.88 in.)
Main Clutch Disk Diameter (ePowrReverser Transmission) - 12,6 cm (4.96 in.)
Front Axle Operating Capacity - 720-1275 kg (1588-2811 lb)
Rear Axle Operating Capacity - 2000 kg (4410 lb)
Drawbar Maximum Vertical Load - 255 kg (562 lb)

John Deere 4210 Hydraulic and Hitch

Type of Hydraulic System - Open Center
Power Steering - Standard
Implement and Steering Pump Type - Gear Pump
Working Pressure - 14652 kPa (2125 psi)
Pump Capacity (Main) Rated Speed - 26.5 L/min (7.0 gpm)
Pump Capacity (Power Steering) Rated Speed - 20.1 L/min (5.3 gpm)
Total Flow of Pumps Rated Speed - 46.5 L/min (12.3 gpm)
3-Point Hitch Type - Category 1
Lift Capacity-61 cm (24 in.) Behind Link Arms - 771 kg (1700 lb)

Capacities

Fuel Tank - 37.9 L (10.0 gal)
Cooling System - 5.3 L (5.6 qt)
Crankcase with Filter - 3.8 L (4.0 qt)
Transmission and Hydraulic System (Gear Models) - 24 L (6.3 gal)
Transmission and Hydraulic System (eHydro Model) - 26 L (6.8 gal)
Front Axle (MFWD Models) - 4.5 L (4.7 qt)

JD 4210 Wheels and Tires

Front

7.00-14 4PR R3 BS
25-10.50LLx15 6PR
23x8.50-12 4PR R4 (MFWD)
24x8.50-14 4PR R3 (MFWD)
24x8.50-14 4PR R3 (2WD)
4.00-15 4PR F2

Rear

41LLx18.00-16.1 6PR
11.2-24 4PR R3 BS
11.2-24 4PR R1
12.4-16 6PR R1
13.6-16 4PR R3I
14.00-17.5 6PR R4

John Deere 4210 Dimensions

Wheelbase - 1,7 m (65.0 in.)
Overall Length with 3-Point Hitch - 3 m (117 in.)
Overall Width (Minimum) - 1,3 m (53 in.)
Overall Width (Maximum) - 1,5 m (58.4 in.)
Inside Width (Minimum) - 69 cm (27.1 in.)
Inside Width (Maximum) - 73 cm (28.5 in.)
Height From Ground To Top of Hood - 1,2 m (50.4 in.)
Height From Ground To Top of Standard ROPS - 2 m (79.5 in.)
Height From Ground To Top of Folding ROPS - 2,2 m (87.1 in.)
Ground Clearance, Rear Axle - 27 cm (10.5 in.)
Weight (2WD) - 1077 kg (2375 lb)
Weight (MFWD) - 1213 kg (2675 lb)