________________________________________________________________________________

John Deere 4310 Specs

JD 4310 Engine Specifications

Engine Model - Yanmar 3TNE84
Type - Diesel
Cylinders - 3
Gross Horsepower - 23.2 kW (31.2 hp)
PTO Horsepower (SyncShift and ePowrReverser) - 20.1 kW (27.0 hp)
PTO Horsepower (eHydro Transmission) - 19.0 kW (25.5 hp)
Rated Engine Speed - 2600 rpm
Operating Range - 1000-2810 rpm
Engine Torque Rated Speed - 78.5 Nm (57.9 lb-ft)
Compression Ratio - 18.5:1
Lubrication - Pressurized
Cooling System - Water Pump
Oil Filter - Single Element
Air Cleaner - Dry Type with Safety Element
Starting Aid - Air Heater
Electrical System Type - 12 Volt
Battery Size - 500 Cold Cranking Amps at -18 C (0 F)
Alternator - 40 Amp
High Capacity Alternator - 55 Amp
Starter Size - 1.4 kW (1.9 hp)
Fuel Filter - Replaceable Element
Fuel - Diesel
Fuel Pump - In-Line with Electric Shutoff
Fuel Delivery - Direct Injection, Self Bleeding
Fuel Tank Capacity - 37.9 L (10.0 gal)
Cooling System Capacity - 5.7 L (6.0 qt)
Crankcase with Filter Capacity - 4.3 L (4.5 qt)

John Deere 4310 Power Take-Off

PTO Type - Independent
Clutch Type - Wet Disk
Brake Type - Wet Disk
Speed (Mid-PTO rpm Rated Engine Speed) - 2100 rpm
Speed (Rear PTO rpm Rated Engine Speed) - 540 rpm

JD 4310 Drive Train

Basic Transmission - 9x3 SyncShift (2WD and 4WD)
Optional Transmission - 12x12 ePowrReverser (4WD Only) / eHydro (2WD and 4WD)
Number Of Speeds (SyncShift Transmission) - 9 Forward, 3 Reverse
Number Of Speeds (ePowrReverser Transmission) - 12 Forward, 12 Reverse
Number Of Speeds (eHydro Transmission) - Infinite Forward, Infinite Reverse
Mechanical Front Wheel Drive Standard - ePowrReverser
Mechanical Front Wheel Drive Optional - eHydro
Capability for MFWD - All Ranges
Rear Final Drive Type - Spur Gear
Differential Lock - Mechanical
Brakes Type - Wet Disk
Main Clutch Disk Type (SyncShift Transmission) - One Mult-Disk Wet Clutch
Main Clutch Disk Type (ePowrReverser Transmission) - Two Mult-Disk Wet Clutches
Main Clutch Disk Diameter (SyncShift Transmission) - 12,4 cm (4.88 in.)
Main Clutch Disk Diameter (ePowrReverser Transmission) - 12,6 cm (4.96 in.)
Front Axle Operating Capacity - 720-1450 kg (1588-3197 lb)
Rear Axle Operating Capacity - 2000 kg (4410 lb)
Drawbar Maximum Vertical Load - 255 kg (562 lb)
Transmission and Hydraulic System (Gear Models) Capacity - 24 L (6.3 gal)
Transmission and Hydraulic System (eHydro Model) Capacity - 26 L (6.8 gal)
Front Axle (MFWD Models) Capacity - 4.5 L (4.7 qt)

John Deere 4310 Hydraulic and Hitch

Type of Hydraulic System - Open Center
Power Steering - Standard
Implement and Steering Pump Type - Gear Pump
Working Pressure - 17238 kPa (2500 psi)
Pump Capacity (Main) Rated Speed - 32.5 L/min (8.6 gpm)
Pump Capacity (Power Steering) Rated Speed - 20.1 L/min (5.3 gpm)
Total Flow of Pumps Rated Speed - 52.5 L/min (13.9 gpm)
3-Point Hitch Type - Category 1
Lift Capacity-61 cm (24 in.) Behind Link Arms - 999 kg (2200 lb)

JD 4310 Wheels and Tires

Front

7.00-14 4PR R3 BS
25-10.50LLx15 6PR
7.00-16 6PR R1 (MFWD)
25x8.50-14 6PR R4
27x8.50-15 4PR R3 (2WD)
27x8.50-15 6PR R4

Rear

11.2-24 4PR R3 BS
11.2-24 4PR R1
41x14.00-20 4PR R3
43x16.00-20 6PR R4

John Deere 4310 Dimensions

Wheelbase - 1,7 m (68.0 in.)
Overall Length with 3-Point Hitch - 3 m (117 in.)
Overall Width (Minimum) - 1,3 m (50.0in.)
Overall Width (Maximum) - 1,7 m (66.7 in.)
Inside Width (Minimum) - 67 cm (26.5 in.)
Inside Width (Maximum) - 1 m (40.1 in.)
Height From Ground To Top of Hood - 1,4 m (53.3 in.)
Height From Ground To Top of Standard ROPS - 2,1 m (82.4 in.)
Height From Ground To Top of Folding ROPS - 2,3 m (90.0 in.)
Ground Clearance, Rear Axle - 34 cm (13.4 in.)
Weight (2WD) - 1179 kg (2600 lb)
Weight (MFWD) - 1315 kg (2900 lb)