________________________________________________________________________________

John Deere 5080E Specs

JD 5080E Engine Specifications

Engine Model - John Deere PowerTech 3029H
Engine Power at Rated Speed - 58,84 kW (79 hp)
Engine Type - In-line Diesel Engine, Four Stroke
Aspiration - Turbocharged with Charge Air Cooler
Number of Cylinders - 3
Displacement - 2,9 L
Compression Ratio - 16.9:1
Low Idle Speed - 850 rpm
Rated Engine Speed - 2400 rpm
Engine Maximum Speed - 2600 rpm
Torque Bulge - 25%
Maximum Torque - 294 Nm (216,8 lb-ft)
Speed at Maximum Torque - 1400 rpm
Injection Pump - Piston Injection Pump
Fuel Transfer Pump - Mechanical
Filtering System - 2-stage with Water Separator
Fuel Tank Capacity - 115L (30.38 gal) / 125L (33.02 gal)
Cooling System - 11L (2.9 gal)
Engine Oil (with Filter) - 11L (2.9 gal)
Voltage - 12V
Alternator Capacity - 90A
Battery Type - Sealed (unserviceable)
Battery Capacity - 100Ah
Starter Motor - 2.8kW
Worklights (Std) - Halogen
Worklights (Prem) - LED

Power Take-Off

Type - Independent
Actuation - Mechanical
PTO Power at Engine Rated Speed - 47,7 kW (64,39 hp)
PTO Rated Speed - 540 rpm
Engine Speed at PTO Rated Speed - 2083 rpm
Engine Speed at PTO-E Rated Speed - 1588 rpm

John Deere 5080E Transmission

Transmission Type (Std) - Top Shaft Synchronized
Number of Gears - 9 Foward / 3 Reverse
Speeds (Foward), km/h (mph) - 2.3 (1.4) - 28.8 (17.9)
Speeds (Revers), km/h (mph) - 3.2 (1.9) - 20.4 (12.7)
Transmission Type (Opt) - PowrReverser
Number of Gears - 12 Foward / 12 Reverse
Speeds (Foward), km/h (mph) - 1.7 (1.1) - 35.1 (21.8)
Speeds (Revers), km/h (mph) - 1.8 (1.2) - 38.3 (23.8)
Clutch - Mechanical or Eletro-hydraulic
Clutch Type - Double Disk
Diameter of Disk - 28,0 cm (11 in)

John Deere 5080E Axles and Brakes

Front Axles Type - 4x4
Activation - Mechanical
Suspension - No
Differential Lock - Automatic
Limited-slip Differential - Yes
Work Pressure - 15 000 kPa (150 bar) (2175.6 psi)
Front Axle Total Capacity (Total) - 5.6 L (14.79 gal)
Rear Axle Type - Flanged
Rear Axle Final Drive - Planetary, Internally Mounted
Differential Lock - Mechanical
Service Brake - Disk-in-Oil Bath, Auto-adjustable, Hydraulically Actuated
Park Brake - Transmission Lock, Engaged by Gearshift Lever

JD 5080E Hydraulics and Hitch

Hydraulic System Type - Open Center
Pump Type - Gear
Pump Flow Rate - 43 L/min (11,4 gal/min)
Maximum Pressure - 20000 kPa (200 bar) (2900 psi)
Steering System - Hydrostatic System with Exclusive Pump
Steering Pump Flow Rate - 26 L/min (6,9 gal/min)
Standard Selective Control Valves - 2 SCV
Optional Stackable Selective Control Valves - 2 SCV / 3 SCV
Rear Hitch Category - 2
Hitch Type - Ball Joint
Sensor - Center Link
Lifting Capacity on Ball Joints - 1890 kgf/2140 kgf
Lifting Capacity at 610 mm (2 ft) of Hitch (NBR13145) - 1800 kgf/2025 kgf

John Deere 5080E Tire Sizes

Front Tires - 12.4-24 R1 - 10PR Forestry
Front Tires - 12.4-24 R1 - 6PR
Front Tires - 12.4-24 R1 - 6PR
Front Tires - 12.4-24 R1 - 10PR Forestry
Rear Tires - 18.4-30 R1 8PR FL
Rear Tires - 18.4-30 R2 FL 6PR

553 Loader Specifications

Height (to pin) - 122 inches (309 cm)
Clearance, dumped bucket - 94 inches (238 cm)
Dump reach - 35 inches (88 cm)
Dump angle - 41
Reach at ground - 74 inches (187 cm)
Rollback at ground - 33
Breakout force (at pin) - 5,378 lbs (2439 kg)
Breakout force (at 800mm) - 3,604 lbs (1634 kg)
Lift to full height (at pin) - 3,133 lbs (1421 kg)
Lift to full height (at 800mm) - 1,956 lbs (887 kg)
Lift to 1.5m (at pin) - 4,008 lbs (1818 kg)
Lift to 1.5m (at 800mm) - 2,891 lbs (1311 kg)
Bucket width - 72 inches (182 cm)

JD 5080E Dimensions and Weights

Wheelbase - 2,05 m (6.73 ft)
Total Length without Front Weights and Pickup Hitch - 3,35 m (10.95 ft)
Total Length with Front Weights and Pickup Hitch - 4,1 m (13.40 ft)
Maximum Height - 2,6 m (8.55 ft)
Width of the Flanged Rear Axle - 1,45 m (4.80 ft)
Machine Total Weight without Ballast - 3232 kg (7125 lb)
Maximum Weight with Ballast - 4600 kg (10 141 lb)