________________________________________________________________________________

John Deere 5210 Specs

John Deere 5210 Engine Specifications

Engine Model - 3029D, Naturally Aspirated
Factory Observed PTO Power - 33.6 kW (45 hp) at 2400 rpm
Maximum Engine Torque - 162 Nm at 1400 rpm
Cylinders Quantity - 3
Bore - 106.5 mm (4.19 in.)
Stroke - 110 mm (4.33 in.)
Displacement - 2.9 L (179 cu in.)
Compression Ratio - 17.8:1
Cylinder Firing Order - 1-2-3
Intake Valve Clearance - 0.35 mm (0.014 in.)
Exhaust Valve Clearance - 0.45 mm (0.018 in.)
Slow Idle Speed - 825-875 rpm
Fast Idle Speed - 2550-2600 rpm
Operating Range Speed - 1600-2400 rpm
Injection Pump Timing Position - 6° BTDC (TimeTrac)
Electrical System - 12-Volt, Negative Ground
Battery Voltage - 12-volt
Cold Cranking Amps - 700 CCA
Open Station BCI Group Size - 28 H
Cab BCI Group Size - 31
Alternator - 40 amps

JD 5210 Transmission

Standard Transmission - 9/3 CollarShift Transmission
Type - unsynchronized gear
Gears - 9 forward and 3 reverse
Clutch - dry disc
Optional Transmission - 9/3 SyncShuttle with shiftable 540/540E PTO or 12/12 PowrReverser
Type - power shuttle
Gears - 12 forward and reverse
Clutch - wet disc
Lever Gear Selector - Manual Shift

John Deere 5210 Power Take-Off

PTO Type - Standard Fully Independent PTO (540)
Operational SyncShuttle Shiftable - 540/540E Independent
Lever Operated Clutch
Engine-540E (SyncShuttle) Speed - 1700 rpm
Engine-540 Speed - 2400 rpm
Power Take-Off Size - 280 mm (11 in.)

Mechanical

Chassis - 4x2 2WD / 4x4 MFWD 4WD
Steering - hydrostatic power
Brakes - Hydraulically Operated, Wet Disk, Self-Adjusting
Cab - Two-post ROPS. Cab optional

JD 5210 Hydraulic System

Type - Open Center Type
Pump Type - Tandem Gear Pump
Steering - Hydrostatic Power Steering
Pump Displacement-Steering - 11.9 cu cm (0.73 cu in.)
Pump Displacement-Implement - 20 cu cm (1.22 cu in.)
Steering Flow Rate - 25.7 L/min. (6.8 gpm)
Implement Flow Rate - 43.2 L/min. (11.4 gpm)
Steering (Maximum) Pressure - 12 997-13 500 kPa (130-135 bar) (1885-1955 psi)
Implement (Maximum) Pressure - 18 995-19 692 kPa (190-197 bar) (2755-2855 psi)
Hitch Lift Capacity - 1530 kg (3374 lb)
SCV Flow Rate - 43.2 L/min (11.4 gpm)

Three-Point Hitch

Type - Categories I and II, Top Link Sensing
Standard - Fixed Draft Links with Interchangeable Balls
Optional - Telescopic Draft Links with Interchangeable Balls
Three-Point Hitch Lift Capacity at 610 mm (24 in.) Behind Hitch Balls - 1530 kg (3374 lb)

John Deere 5210 Capacities

Fuel Tank (Open Station/Cab) - 68 L (18 gal) / 87 L (23 gal)
Cooling System - 9.5 L (10 qt)
Crankcase (including filter change) - 8.5 L (9 gal)
Dry Clutch (CollarShift and SyncShuttle Transmission) - 38 L (10 gal)
Wet Clutch (PowrReverser Transmission) - 43.5 L (11.5 gal)
Mechanical Front Wheel Drive (MFWD) Wheel Hubs - 0.6 L (0.6 qt)
MFWD Axle Housing - 5 L (5.2 qt)
MFWD Assembly - 6.2 L (5.7 qt)

Tires

Front Tires - 6.50-16 6PR
Front Tires - 7.50-16 6PR
Front Tires - 9.5L-15 6PR
Rear Tires - 13.6-28 4PR
Rear Tires - 14.9-24 6PR

JD 5210 Dimensions

Overall Width (with Roll-Gard ROPS/Cab) - 1661 mm (65.4 in.)
Overall Length (less Hitch, Drawbar and Front Weights) - 3114 mm (122.6 in.)
Overall Height from Ground-to-Top of Hood - 1425 mm (56.1 in.)
Overall Height from Ground-to-Top of Steering Wheel - 1595 mm (62.8 in.)
Overall Height from Ground-to-Top of Roll-Gard ROPS - 2230 mm (87.8 in.)
Overall Height from Ground-to-Top of Folded ROPS - 1895 mm (74.6 in.)
Overall Height from Ground-to-Top of Cab - 2464 mm (97 in.)
Overall Height from Ground-to-Top of Drawbar - 401 mm (15.8 in.)
Overall Height from Ground-to-Crop Clearance-Front Axle - 495 mm (19.5 in.)
Centerline of Rear Axle to Folded ROPS - 1285 mm (50.6 in.)
Centerline of Rear Axle to Cab - 1854 mm (73 in.)
Wheelbase - 2050 mm (80.7 in.)
Rear Axle Diameter - 76.2 mm (3 in.)
Turning Radius with Brakes - 2.96 m (9.7 ft)
Turning Radius without Brakes - 3.44 m (11.3 ft)
Shipping Weight - 1932 kg (4250 lb)

John Deere 521 Loader

Height (to pin) - 122 inches (309 cm)
Clearance, dumped bucket - 99.8 inches (253 cm)
Dump reach - 20.2 inches (51 cm)
Dump angle - 37.4
Clearance, level bucket - 117 inches (297 cm)
Reach at ground - 62 inches (157 cm)
Breakout force (at pin) - 3485 lbs (1580 kg)
Lift to full height (at pin) - 2500 lbs (1134 kg)