________________________________________________________________________________

John Deere 5325 Specs

JD 5325 Engine Specifications

Engine Type - 5030 Diesel
Cylinders - 5
Aspiration - Turbocharged
Lubrication - Full pressure, full flow filtration
Displacement - 3.0 L (184 cu. in.)
Bore - 86 mm (3.39 in.)
Stroke - 105 mm (4.13 in.)
Compression Ratio - 18.0:1
Cylinder Firing Order - 1-2-4-5-3
Slow Idle Speed - 900 ±50 rpm
Fast Idle Speed - 2625 ±50 rpm
SAE Gross Engine Horsepower - 50 kW (67 hp)
PTO Horsepower (Factory Observed) - 41 kW (55 hp)
Rated Speed - 2400 rpm
Fuel Injection Type - Integrated Fuel System (IFS) Integral with Cylinder Block
Air Cleaner - Dry-type, Primary and Secondary Elements
Cooling System Type - 69 kPa (0.7 bar) (10 psi) Centrifugal Pump
Fan - Viscous Drive
Thermostat - Single
Electrical System Type - 12 volt, negative ground
Battery Voltage - 12 volt
Battery Cold Cranking Amps - 925 (5 Cyl.)
Reserve Capacity (minutes) - 180
Battery BCI Group Size - 31
Alternator - Open Station: 70 amp / Cab: 90 amp

John Deere 5325 Power Take-Off

PTO Type - Standard: Fully Independent, Shiftable (540/540E) / Optional: 540/1000 rpm
Speed-540E - 1700 engine rpm
Speed-540 or 1000 - 2400 engine rpm
Size - 35 mm (1-3/8 in.)
Clutch - Electro-Hydraulic Operated

JD 5325 Mechanical

Basic Transmission - 12/12 PowrReverser with EH Hitch, EH PTO (shiftable 540/540E)
Optional Transmission - 24/24 PowrReverser with EH Hitch, EH PTO (shiftable 540/540E)
Type - partially synchronized
Gears - 9 forward and 3 reverse
Clutch - dry disc
Chassis - 4x2 2WD / 4x4 MFWD 4WD (optional)
Steering - hydrostatic power
Brake Type - Hydraulically operated wet disk, self-adjusting, self-equalizing

John Deere 5325 Hydraulic System and Hitch

Hydraulic Type - Open center, tandem gear pump, hydrostatic power steering
Pump Displacement-Steering - 10.0 cu cm (0.61 cu in.)
Pump Displacement-Implement - 22.9 cu cm (1.40 cu in.)
Steering Flow Rate - 22.3 L/min (5.9 gpm)
Implement Flow Rate - 51.2 L/min (13.5 gpm)
Maximum Pressure-Steering - 13000-13500 kPa (130-135 bar) (1885-1958 psi)
Maximum Pressure-Implement - 19500 ±500 kPa (195 ±5 bar) (2828 ±73 psi)
Rear SCVs - (Standard) Basic, 2-Function
Rear SCVs (Optional) - Deluxe, 3-Function, Adjustable
Optional Mid-Mount Valve with Multi-Function Control Lever - Basic, 2-Function
Three-Point Hitch Type - Top link sensing, Category IN, I and II
Standard - Draft links with adjustable ends and interchangeable balls
Lift Capacity at 610 mm (24 in.) Behind Hitch Balls - 1530 kg (3374 lb)

Capacities

Fuel Tank - 72 L (19 gal)
Cooling System - 9.5 L (2.5 gal)
Crankcase with filter - 10 L (11 qt)
Transmission-Hydraulic System - 43.5 L (11.5 gal) 12/12 PowrReverser / 45.4 L (12.0 gal) 24/24 PowrReverser
MFWD Differential Housing - 5.0 L (5.3 qt)
MFWD Wheel Hub (Each) - 0.5 L (0.63 qt)

JD 5325 Dimensions

Wheel Base (2WD) - 2050 mm (81 in)
Wheel Base (MFWD) - 2077 mm (81.8 in)
Overall Length Including Draft Links (2WD) - 3500 mm (138 in)
Wheel Base (MFWD) - 3632 mm (143 in)
Width (Outside Edge of Tires) - 1842 mm (72.5 in)
Width (Rear Axle Flange-to-Rear Axle Flange) - 1147 mm (45.2 in)
Width (MFWD Flange-to-MFWD Flange) - 1155 mm (45.5 in)
Width (Ground-to-ROPS Top) - 2408 mm (95 in)
Width (Ground-to-Folded ROPS Top) - 1946 mm (77 in)
Width (Ground-to-Steering Wheel Top) - 1615 mm (64 in)

Permissible Load Specifications

Maximum Permissible Static Vertical Load

Drawbar Fully Extended, kg (lb) - 650 (1430)
Drawbar PTO Mid-Position, kg (lb) - 760 (1675)
Drawbar Short Position, kg (lb) - 1120 (2470)

Maximum Permissible Axle Loads-2-Wheel Drive, With Loader

Front Tires 27/9.5-15 6PR, kg (lb) - 2430 (5350)

Maximum Permissible Axle Loads-2-Wheel Drive and Mechanical Front Wheel Drive

Rear Tires 12.4-24 6PR, kg (lb) - 1090 (2400)
Rear Tires 14.9-24 6PR, kg (lb) - 1361 (3000)
Rear Tires 14.9-28 6PR, kg (lb) - 3230 (7120)
Rear Tires 16.9-24 6PR, kg (lb) - 3450 (7600)

Maximum Permissible Front Axle Loads-Mechanical Front Wheel Drive Without Loader

Front Tires 8.3-16 6PR, kg (lb) - 1090 (2400)
Front Tires 9.5-16 4PR, kg (lb) - 1000 (2200)
Front Tires 10.5/80-18 10PR, kg (lb) - 2500 (5500)