________________________________________________________________________________

John Deere 6090MC Specs

John Deere 6090MC Engine Specifications

Engine type - 4045HL490
Type - Turbocharged diesel engine with charge air cooler and exhaust gas recirculation
Engine power according to 97/68/EC at rated speed - 66 kW (90 hp)
Maximum torque at 1500 rpm - 406 Nm (299 lb.-ft.)
Number of cylinders - 4
Bore - 106.5 mm (4.19 in.)
Stroke - 127.0 mm (5.0 in.)
Displacement - 4.5 L (276 in.3)
Compression ratio - 19:1
Firing order - 1-3-4-2
Intake valve clearance - 0.46 mm (0.018 in.)
Exhaust valve clearance - 0.53 mm (0.021 in.)
Slow Idle - 850 rpm
Fast idle - 2250 rpm
Rated engine speed - 2100 rpm
Operating speed range (rpm) - 1300 - 2100
Electrical System Rating - 12V
Battery - 12 V, 110 Ah or 12 V, 154 Ah
Alternator with overvoltage protection - 14 V, 90 A or 14 V, 120 A or 14 V, 150 A
Starting motor - 12 V, 3.0 kW (4.0 hp)
Ground connection - negative

JD 6090MC Power Take-off

Rear PTO 540 rpm - 1938 rpm
Rear PTO 1000/540 rpm - 1962 rpm / 1967 rpm
Rear PTO 1000/540/540E rpm rear PTO - 1962 rpm / 1967 rpm / 1496 rpm
Front PTO 1000 rpm - 1969 rpm
Max. front PTO power is limited to - 80 kW (107 hp)

Transmission

Model - PowrQuad PLUS transmission
Transmission Type - Planetary gears, hydraulically actuated
Clutch - hydraulically
16 forward gears, 16 reverse gears - 0.24-30 km/h (0.15-18.6 mph)
16 forward gears, 16 reverse gears - 0.29-40 km/h (0.18-25 mph)
24 forward gears, 24 reverse gears - 0.15-40 km/h (0.09-25 mph)

John Deere 6090MC Hitch

Rear hitch Category - CAT 2 and 3N
Lift cylinder, diameter - 65 mm
Maximum lift capacity directly at coupling points - 3700 kg (8160 lb.)
Sustained lift capacity, 610 mm behind the coupling points - 1800 kg (3970 lb.)
Sustained lift capacity, 1800 mm behind the coupling points - 1400 kg (3085 lb.)
Front hitch Category - CAT 2
Maximum lift capacity at coupling points - 3000 kg (6610 lb.)
Sustained lift capacity at coupling points - 2570 kg (5665 lb.)

JD 6090MC Hydraulic System

Type - PC system (Pressure-compensated hydraulic system with constant flow rate)
Gear Pump - 28 cm3 (1.71 in.3) / optional 35 cm3 (2.13 in.3)
Delivery rate per minute at rated speed (28 cm3 pump) - 65 liters (17.2 U.S.gal.)
Delivery rate per minute at rated speed (35 cm3 pump) - 80 liters (21.1 U.S.gal.)
System pressure (min.) - 3000 kPa (30 bar; 435 psi)
System pressure (max.) - 20000 kPa (200 bar; 2900 psi)
Steering - hydrostatic

Tires

Front Tires - 12.4R24 / 12.4R28
Front Tires - 13.6R24 / 13.6R28
Front Tires - 16.9R24
Rear Tires - 16.9R30 / 16.9R34
Rear Tires - 18.4R30 / 18.4R38

John Deere 6090MC Capacities

Fuel tank (Cab without low profile) - 205 L (54.2 US.gal.)
Fuel tank (Cab with low profile) - 195 L (51.5 US. gal.)
Cooling system (engine cooling and cab heating) - 28.2 L (6.2 US.gal.)
Engine crankcase - 17.1 L (4.5 US.gal.)
Transmission/hydraulic system, oil change (PowrQuad transmission) - 52 L (13.7 US.gal.)
Transmission/hydraulic system, oil change (PowrQuad PLUS transmission) - 52 L (13.7 US.gal.)
Transmission/hydraulic system, oil change (extra with creeper transmission) - 1 L (0.3 US.gal.)
Transmission/hydraulic system, oil change (extra with front-wheel drive axle with or without TLS) - 3 L (0.8 US.gal.)
Front PTO - 2.6 L (0.69 US.gal.)
Front-wheel drive axle housing - 8.2 L (2.2 US.gal.)
Front-wheel drive final drives (without brake) - 1.7 L (0.4 US.gal.)

Loads and Weights

Max. permissible static vertical load

On standard drawbar (road travel) extended 250 mm (9.8 in.) - 1600 kg (3527 lb.)
On heavy-duty drawbar (field operation) extended 250 mm (9.8 in.) - 2250 kg (4960 lb.)
On heavy-duty drawbar (field operation) extended 350 mm (13.8 in.) - 1400 kg (3086 lb.)
On heavy-duty drawbar (field operation) extended 400 mm (15.7 in.) - 1200 kg (2646 lb.)
On trailer hitch - 2000 kg (4400 lb.)
On tow hook of pick-up hitch - 3000 kg (6610 lb.)
On piton-fix tow hitch - 3000 kg (6610 lb.)
Static vertical load on ball-type tow hitch (transport) - 3000 kg (6610 lb.)

Maximum permissible front axle load (without front-wheel drive axle)

Normal operation up to 40 km/h (25 mph) - 2050 kg (4520 lb.)
With front loader, up to max. 10 km/h (6 mph) and with tread width of 1.90 m (75 in.) - 5000 kg (11023 lb.)

Maximum permissible front axle load (with front-wheel drive axle)

Normal operation up to 40 km/h (25 mph) - 3700 kg (8157 lb.)
With front loader, up to max. 10 km/h (6 mph) and with tread width of 1.90 m (75 in.) - 5580 kg (12302 lb.)

Maximum permissible rear axle load - 6000 kg (13228 lb.)
Maximum permissible total weight - 7900 kg (17416 lb.)

JD 6090MC Dimensions

Wheel base - 2400 mm (94.5 in.)
Length (Basic weight to draft link in horizontal position) - 4305 mm (169.5 in.)
Length (Front weight to draft link in horizontal position) - 4727 mm (186.1 in.)
Maximum total height from ground to cab roof (without beacon light) - 2631 mm (103.6 in.)
Width (front axle - flange to flange) - 1680 mm (66.1 in.)
Width (front axle - maximum tread width without extension) - 2015 mm (79.3 in.)
Width (rear axle - flange to flange) - 1552 mm (61.1 in.)
Maximum width for road travel - 2550 mm (100.4 in.)
Maximum ground clearance at differential housing (with drawbar) - 425 mm (16.7 in.)
Maximum ground clearance at differential housing (with drawbar) - 385 mm (15.2 in.)