________________________________________________________________________________

John Deere 7510 Specs

John Deere 7510 Engine Specifications

Engine Model - PowerTech 6068
Engine Type - Diesel
Cylinders - In-line 6
Engine Power (Factory Observed) - 85 kW (115 hp)
Rated Speed - 2100 rpm
Aspiration - Turbocharged
Lubrication - Full Pressure-Flow Filtration with Bypass
Displacement - 6.8 L (414 in.3)
Bore - 106.5 mm (4.19 in.)
Stroke - 127 mm (5.00 in.)
Compression Ratio - 17.0:1
Slow Idle Speed - 800-900 rpm
Operating Speed - 1680-2100 rpm
Fuel System Type - Direct Injection
Injection Pump Type - Rotary
Injection Pump Timing - TDC
Air Cleaner - Dry Type Dual Element
Cooling System Type - 69 kPa (0.7 bar) (10 psi) with Centrifugal Pump
Fan - Viscous Drive
Thermostats - Two Heavy-Duty
Electrical System Type - 12 Volt, Negative Ground
Alternator - Open Station 90 amp / Cab 120 amp
Batteries - Two 12 Volt in Parallel

Power Take Off

PTO Type - Fully Independent
Speed 540 rpm - 2080 Engine rpm
Speed 1000 rpm - 2093 Engine rpm
PTO Size - 35 mm (1-3/8 in.)
Clutch - Multiple Wet-Disk Hydraulically Operated

JD 7510 Transmission

Standart Transmission - SyncroPlus
Type - Planetary Gears, Mechanically Activated, Wet Disk Clutches and Brakes
Gear Selections - 12 Forward, 4 Reverse
Shifting - Mechanical, Fully Synchronized Shift On-th-Go and Under Load in Each Range
Optional Transmission - PowrQuad
Type - Planetary Gears, Hydraulically Activated, Wet Disk Clutches and Brakes
Gear Selections - 16 or 20 Forward, 16 or 20 Reverse
Shifting - Mechanical-Hydraulic, Full Power Shift On-the-Go, and Under Load in Each Range

Mechanical

Chassis - 4x2 2WD / 4x4 MFWD 4WD (optional)
Steering - hydrostatic power
Brakes Type - Hydraulically Operated Wet Disk
Cab - ComfortGard cab standard

John Deere 7510 Hydraulic System and Hitch

Type - Closed-Center, Pressure/Flow Compensated
Pump - 9-Piston, Variable Displacement Axial
Pump Displacement (Standard) - 25 cm3 (1.5 in.3)
Pump Displacement (Optional) - 40 cm3 (2.4 in.3)
Valves - 2 to 4
Pump flow - 26 gpm (98.4 lpm) / 38 gpm (143.8 lpm)
Total flow - 16 gpm (60.6 lpm)
Maximum Pressure - 20 000 kPa (200 bar) (2900 psi)
Steering System - Hydrostatic
Available Flow at One SCV (Standard/Optional) - 1.6 L/s (26 gpm) / 2.4 L/s (38 gpm)
Hitch Type - 2 or 3N/2
Hitch Lift Capacity Two-Wheel Drive - 3360 kg (7400 lb)
Hitch Lift Capacity MFWD - 3809 kg (8390 lb)

JD 7510 Capacities

Fuel Tank (Standard/Optional) - 190 L (50gal)/152 L (40gal)
Cooling System - 19 L (20qt)
Crankcase with Filter - 19 L (20qt)
SyncroPlus Transmission, Differential and Hydraulic System - 57 L (15gal)
SyncroPlus Transmission with MFWD, Differential and Hydraulic System - 64 L (17gal)
PowrQuad Transmission, Differential, and Hydraulics - 57 L (15gal)
PowrQuad Transmission with MFWD, Differential and Hydraulics - 64 L (17gal)
PowrQuad Transmission with Creeper, Differential, and Hydraulics - 61 L (16gal)
PowrQuad Transmission with MFWD and Creeper, Differential and Hydraulics - 68 L (18gal)
Mechanical Front Wheel Drive Axle Housing - 14,4 L (15,2qt)
Mechanical Front Wheel Drive Wheel Hubs (Standard) - 1,9 L (2qt)
Mechanical Front Wheel Drive Wheel Hubs (High Crop) - 3,8 L (4qt)
Rear Hi-Crop Axle Housings - 3,8 L (4qt)

John Deere 7510 Dimensions and Weight

Wheelbase Two-Wheel Drive - 2847 mm (112,1 in)
Wheelbase MFWD - 2625 mm (103,3 in)
Length (Less Hitch and Drawbar) - 4395 mm (173,0 in)
Width (Axle Length) Rack and Pinion - 2438 mm (96,0 in)
Width (Axle Length) Flanged - 2006 mm (79,0 in)
Width (Axle Length) Flanged (Hi-Clearance) - 1944 mm (76,5 in)
Height Top of ComfortGard - 3134 mm (123,4 in)
Height Top of Steering Wheel - 2515 mm (99,0 in)
Turning Radius (2WD/MFWD) - 4755 mm (187,2 in.) / 5456 mm (214,8 in)
Ground Clearance (2WD/MFWD) - 896 mm (35,3 in.) / 744 mm (29,3 in)
Weight 2WD with Cab, SyncroPlus, and 18.4-38 Rear and 11.00-16 Front Tires - 5212 kg (11491 lb)
Weight MFWD with Cab, SyncroPlus, and 18.4-38 Rear and 13.6R28 Front Tires - 5599 kg (12343 lb)