________________________________________________________________________________

John Deere 8110 Specs

JD 8110 Engine Specifications

Type - Diesel
Cylinders - In-line 6
ECE-R24 at Rated Speed - 143 kW (195 hp)
Rated Speed - 2200 rpm
Aspiration - Turbocharged and Air-to-Air Aftercooled
Lubrication - Full-Flow Filtration with Bypass
Displacement - 8.1 L (496 in3 )
Bore - 116 mm (4.56 in.)
Stroke - 128 mm (5.04 in.)
Intake Valve Clearance - 0.46 mm (0.018 in.)
Exhaust Valve Clearance - 0.71 mm (0.028 in.)
Compression Ratio - 15.8:1
Slow Idle - 800±10 rpm
Fast Idle - 2300±25 rpm
Governed Speed Range - 800-2400 rpm
Operating Speed Range - 1500-2200 rpm
Injection Pump Type - In-Line with Electronic Governor
Fuel Filter - Standard Clamp-On Final Filter with Optional Spin-On Primary Filter with Water Separator Bowl
Air Cleaner - Dry-Type with Secondary Element
Cooling System Type - 69 kPa (0.7 bar) (10 psi) with Centrifugal Pump
Fan - Viscous Drive
Thermostats - Two Heavy-Duty
Electrical System Type - 12 Volt
Alternator - Negative Ground 140 Amp
Batteries - Two 12 Volt
Cold Cranking Amps - 1850

John Deere 8110 Power Take Off

PTO Type - Fully Independent
Standard Size - 45 mm (1-3/4 in.) 1000 rpm
Optional Size - 45 mm (1-3/4 in.) 1000 rpm-35 mm (1-3/8 in.) 1000 rpm-35 mm (1-3/8 in.) 540 rpm Adapter
PTO Operating Speed 1000 rpm - 2200 rpm
PTO Operating Speed 540 rpm - 1975 rpm
PTO (claimed) - 165 hp (123.0 kW)

Transmission

Model - Powershift Transmission
Transmission Type - Electronically Activated, Wet Disk Clutch
Gear Selections - 16 Forward and 4 Reverse
Clutch - Multiple Wet-Disk Hydraulically Activated

JD 8110 Mechanical

Chassis - 4x2 2WD / 4x4 MFWD 4WD (optional)
Steering - Hydrostatic power
Brakes Type - Hydraulically Operated Wet Disk

John Deere 8110 Hydraulics and Hitch

Type - Pressure/Flow Compensated
Tandem Pump (Steering-Brakes-Charge) - Gear Pump
Maximum Pressure - 20 000 kPa (200 bar) (2900 psi)
Rated Flow at Charge Pump - 108 L/min (28 gpm)
Rated Flow at Primary Pump - 78 L/min (21 gpm)
Secondary Pump (Hitch-SCVs) - Axial Piston Pump
Available Flow at SCVs - 132 L/min (33.5 gpm)
Available Flow at SCVs (Optional Pump) - 162 L/min (42.5 gpm)
Selective Control Valves (SCVs) - Electro-hydraulic
3-Point Hitch Lift Capacity per OECD Procedures (610 mm (24 in.) Behind Hitch Points Through Entire Lift Range) - 49.9 kN (14165 lb)
Rear Hitch Type - 3, 3N
Rear lift - 10,400 lbs (4717 kg) / 14,165 lbs (6425 kg)

JD 8110 Dimensions and Weight

Front Tires - 16.9R30
Rear Tires - 18.4R46
Wheelbase - 2950 mm (116.1 in.)
Overall Length - 5246 mm (206.5 in.)
Width (axle length) - 2438 mm (96 in.)
Axle Diameter - 100 mm (3-15/16 in.)
Height Top of Cab - 3005 mm (118.3 in.)
Crop Clearance (Front Axle-MFWD) - 590 mm (23.2 in.)
Crop Clearance (Rear Axle Housing) - 753 mm (29.6 in.)
Drawbar Clearance - 343 mm (15.5 in.)
Turning Radius - 5.3 m (17.5 ft)
Weight (Average Shipping) - 8125 kg (17876 lb)
Maximum Permissible Front Axle Loads - 6000 kg (13125 lb)
Maximum Permissible Rear Axle Loads - 10 000 kg (22025 lb)
Maximum Permissible Tractor Weight - 14 000 kg (30840 lb)
Maximum Total Weight (Tractor and Trailer) - 40 000 kg (88000 lb)