________________________________________________________________________________

John Deere 2210 Specs

JD 2210 Engine Specifications

Manufacturer - Yanmar
Model Number - 3TNE74
Type - Diesel
Gross Horsepower 17.1 kW (23.0 hp)
PTO Horsepower 13.2 kW (17.7 hp)
Cylinders - Three
Bore/Stroke - 2.91x3.07 inches (74 x 78 mm)
Rated Engine Speed - 3000 rpm
Speed, Fast Idle - 3250
Speed, Slow Idle - 1400
Operating Range - 1400 - 3250 rpm
Cooling Type - Liquid
Oil Filter - Standard Single Element
Air Cleaner - Dry Type w/ Safety Element
Fuel System Type - Indirect Fuel Injection
Fuel - Diesel
Fuel Filter - Replaceable Element
Fuel Pump - In-line with Solenoid Shutoff
Electrical System Type - 12 Volt
Battery Size 435 Cold Cranking Amps -18°C (0°F)
Alternator - 20 amp

John Deere 2210 Drivetrain

Transmission Type - 2 Range Hydrostatic
Number of Speeds - Infinite
Mechanical Front Wheel Drive (MFWD) - Standard
MFWD Capability - All Ranges
MFWD Engagement - On The Go
Final Drive - Spur Gear
Rear Axle Maximum Load - 1415 kg (3120 lb)
Front Axle Maximum Load - 1415 kg (3120 lb)
Forward Speed-Range High - 0-13.3 km/h (0-8.4 mph)
Forward Speed-Range Low - 0-6.6 km/h (0-4.3 mph)
Reverse Speed-Range High - 0-10.6 km/h (0-6.3 mph)
Reverse Speed-Range Low - 0-5.3 km/h (0-3.2 mph)

JD 2210 PTO

Type - Independent
Clutch Type - Wet Disk
Mid PTO Brake - Shoe Type
Speed-Mid PTO rpm / 2900 engine RPM - 2100 rpm
Speed-Rear PTO rpm / 2900 engine RPM - 540 rpm

Mechanical

Chassis - 4x4 MFWD 4WD
Final drives - spur gear
Differential lock - mechanical rear
Steering - Power
Brakes - Wet Disk
Cab - Two-post fixed ROPS

John Deere 2210 Hydraulic System

Type - open center
Capacity - 3.4 gal (12.9 L)
Pressure - 1987 psi (137.0 bar)
Mid valves - 2
Pump flow - 3 gpm (11.4 lpm)
Total flow - 5.5 gpm (20.8 lpm)
Steering flow - 2.5 gpm (9.5 lpm)

3-Point Hitch

Type - Category 1
Hitch Plate Maximum Vertical Load - 255 kg (562 lb)
Lift Capacity-61 cm (24 in.) behind link arms - 318 kg (701 lb)
Total Lift Height - 248 mm (9.76 in.)

JD 2210 Wheels and Tires

Front Standard - 18x8.5-10 R1
Front Optional - 18x8.5-10 R3
Rear Standard - 26x12.00-12 R1
Rear Optional - 26x12.00-12 R3
Front Tire Inflation Pressures (Maximum) - 18x8.5-10 R1 - 152 kPa (22 psi) / 18x8.5-10 R3 - 152 kPa (22 psi)
Rear Tire Inflation Pressures (Maximum) - 26x12.00-12 R1 - 83 kPa (12 psi) / 26x12.00-12 R3 - 83 kPa (12 psi)

Capacities

Fuel Tank - 19 L (5.0 gal)
Cooling System - 3.0 L (3.2 qt)
Crankcase with Filter - 2.1 L (2.2 qt)
Transmission and Hydraulic System - 13.0 L (3.4 gal)
Front Axle - 2.5 L (2.6 qt)

John Deere 2210 Dimensions

Wheelbase - 1450 mm (57.1 in.)
Overall Length with 3-point Hitch - 2650 mm (104.3 in.)
Overall Width - 1200 mm (47.2 in.)
Tread Width Centerline (Minimum) - Front 905 mm (35.6 in.) / Rear 896 mm (35.3 in.)
Height From Ground To Top of Hood (R1 Tires) - 1061 mm (41.8 in.)
Height From Ground To Top of Hood (R3 Tires) - 1054 mm (41.5 in.)
Height From Ground To Top of ROPS - 1970 mm (77.6 in.)
Ground Clearance Front Axle - 195 mm (7.7 in.)
Turning Radius MFWD Off - 2300 mm (88.6 in.)
Weight Machine equipped with a ROPS, 3-point hitch, standard R1 tires and all fluids - 635 kg (1400 lb)

Attachments

62-inch Mower deck

Type - mid-mount 3-blade
Cutting width - 62 inches (157 cm)
Belt - shaft-driven

Blade

Type - front-mount John Deere
Width - 54 inches (137 cm)
Lift height - 11 inches (27 cm)
Cut depth - 3.5 inches (8 cm)
Weight - 50 lbs (22 kg)

46-inch Snow blower

Type - front-mount single-stage
Clearing width - 46 inches (116 cm)
Clearing height - 12 inches (30 cm)
Weight - 250 lbs (113 kg)
Overall width - 47.5 inches (120 cm)

John Deere 210 Loader

Height (to pin) - 68.5 inches (173 cm)
Clearance, dumped bucket - 50 inches (127 cm)
Dump reach - 242 inches (614 cm)
Dump angle - 47.2
Reach at ground - 50.2 inches (127 cm)
Rollback at ground - 26.5
Rollback, raised - 98.2
Breakout force (at pin) - 1577 lbs (715 kg)
Breakout force (at 500mm) - 1072 lbs (486 kg)
Breakout force (bucket) - 1650 lbs (748 kg)
Lift to full height (at pin) - 622 lbs (282 kg)
Lift to full height (at 500mm) - 437 lbs (198 kg)
Lift to 1.5m (at pin) - 721 lbs (327 kg)
Lift to 1.5m (at 500mm) - 520 lbs (235 kg)
Bucket width - 49.2 inches (124 cm)
Raise time to height - 3.8 s
Bucket dump time - 2.4 s
Lowering time - 2.0 s
Rollback time - 3.4 s