________________________________________________________________________________

John Deere 4600 Specs

John Deere 4600 Engine Specifications

Engine Model - Yanmar 4TNE84
Engine Type - Diesel
Gross Horsepower - 32.1 kW (43 hp)
PTO Horsepower (Collar Shift/PowrReverser) - 26.8 kW (36 hp)
PTO Horsepower (Hydrostatic) - 25.7 kW (34.5 hp)
Rated Engine Speed - 2600 rpm
Operating Range 950 - 2810 rpm
Engine Torque @ Rated Speed - 107 Nm (79 lb-ft)
Maximum Torque @ 1700 rpm - 133 Nm (98 lb-ft)
Displacement - 2.0 L (122 cu in.)
Cylinders - 4
Bore and Stroke - 84 x 90 mm (3.3 x 3.5 in.)
Compression Ratio - 18:1
Lubrication - Pressurized
Cooling System - Water Pump
Oil Filter - Single Element
Air Cleaner - Dry Type with Safety Element
Fuel Tank Capacity - 47.5 L (12.5 gal)
Cooling System Capacity - 7.2 L (1.9 gal.)
Crankcase Capacity w/ Filter - 4.8 L (5.1 qt.)
Starting Aid - Air Heater
Electrical System Type - 12 Volt
Battery Size - 650 Cold Cranking Amps at -18C
Alternator - 40 Amp
Starter Size - 2.0 kW (2.7 hp)
Fuel Filter - Replaceable Element
Fuel - Diesel
Fuel Pump - In-Line with Electric Shutoff
Fuel Delivery - Direct Injection, Self Bleeding

JD 4600 Power Take-Off

Type - Independent
Clutch Type - Wet Disk
Brake Type - Wet Disk
Speed (Mid PTO rpm @ Rated Engine Speed) - 2100 rpm
Speed (Rear PTO rpm @ Rated Engine Speed) - 540 rpm

John Deere 4600 Transmission

Transmission Type - 9x3 Collar Shift (2WD)
Number Of Speeds - 9 Forward, 3 Reverse
Main Clutch Disk Type - Single Stage Dry
Transmission Type - 12x12 PowrReverser (4WD)
Number Of Speeds - 12 Forward, 12 Reverse
Main Clutch Disk Type - Multiple Stage Wet
Main Clutch Disk Diameter - 240 mm (9.45 in.)
Transmission Type - Hydrostatic (4WD)
Number Of Speeds - Infinite Forward, Infinite Reverse

Mechanical

Capability for MFWD - All Ranges
Rear Final Drive Type - Planetary Gear
Differential Lock - Mechanical
Brakes Type - Wet Disk
Steering - Power, Cylinder-Assisted
Front Axle Operating Capacity - 450-500 kg (992-1102 lb)
Rear Axle Operating Capacity - 900-1000 kg (1984-2205 lb)
Drawbar Tongue Capacity - 259 kg (570 lb)

JD 4600 Hydraulic System and Hitch

Type of System - Open Center
Power Steering - Standard
Pump Type - Dual Gear
Working Pressure - 17237 kPa (2500 psi)
Pump Capacity (Main) @ Rated Speed - 37.5 L/min (9.9 gpm)
Pump Capacity (Power Steering) @ Rated Speed - 18.2 L/min (4.8 gpm)
Total Flow of Pumps @ Rated Speed - 55.6 L/min (14.7 gpm)
3-Point Hitch Type - Category 1
Lift Capacity (24-in. behind link arms) - 1135 kg (2500 lb)
Lower Link Ball Socket ID - 22 mm (7/8 in.)
Upper Link Pin Hole ID - 19 mm (3/4 in.)
Normal Width @ Lower Hitch Pins - 683 mm (27 in.)
Normal Height From Center Pin to Hitch Pin - 457 mm (18 in.)

Tire Sizes and Pressure

Front Tires (2WD) - 6.50-16 6PR F2 TI
Front Tires (2WD) - 27x10.5-15 4PR R3
Front Tires (MFWD) - 8.00-16 6PR R1 TI
Rear Tires - 13.6-28 4PR R1 TI
Rear Tires - 17.5L-24 8PR R4 TI
6.50-16 6PR F2 TI (loaded/unloaded) - 331 kPa (48 psi) / 83 kPa (12 psi)
27x10.5-15 4PR R3 (loaded/unloaded) - 207 kPa (30 psi) / 83 kPa (12 psi)
8.00-16 6PR R1 TI (loaded/unloaded) - 241 kPa (35 psi) / 83 kPa (12 psi)
13.6-28 4PR R1 TI (loaded/unloaded) - 97 kPa (14 psi) / 83 kPa (12 psi)
17.5L-24 8PR R4 TI (loaded/unloaded) - 138 kPa (20 psi) / 83 kPa (12 psi)

JD 4600 Dimensions

Wheelbase - 1816 mm (71.5 in.)
Overall Length w/ 3-Point Hitch - 3.42 m (135 in.)
Overall Width (Minimum) - 1671 mm (71.5 in.)
Overall Width (Maximum) - 2351 mm (92.6 in.)
Inside Width (Minimum) - 925 mm (37 in.)
Inside Width (Maximum) - 1463 mm (58.5 in.)
Height (Hood) - 1230 mm (49.2 in.)
Height (Standard ROPS) - 2210 mm (88.4 in.)
Height (Folding ROPS) - 2360 mm (94.4 in.)
Operating Weight - 1564kg (3450 lb)

John Deere 4600 Attachments

460 Loader

Height (to pin) - 111.9 inches (284 cm)
Clearance, dumped bucket - 88.8 inches (225 cm)
Dump reach - 26.9 inches (68 cm)
Dump angle - 45
Reach at ground - 61.8 inches (156 cm)
Rollback angle - 30
Breakout force (at 80 cm) - 3863 lbs (1752 kg)
Lift to full height (at 80 cm) - 2325 lbs (1054 kg)
Raise time to height - 4.8 s
Bucket dump time - 2.2 s
Lowering time - 3.3 s
Rollback time - 2.5 s

48 Backhoe

Weight - 1517 lbs (688 kg)
Transport height - 81 inches (205 cm)
2-Foot flat digging depth - 102 inches (259 cm)
Reach from pivot - 133 inches (337 cm)
Loading height - 82 inches (208 cm)
Bucket Rotation - 180
Swing Arc - 180
Bucket force - 3730 lbs (1691 kg)
Dipperstick force - 2435 lbs (1104 kg)