________________________________________________________________________________

John Deere 4110 Maintenance Information

John Deere 4110 Maintenance Intervals

Every Ten Hours or Daily Inspection

Engine oil level checking. If after checking the oil level is low, add it.

Transmission/hydraulic oil level checking procedure. When transmission/hydraulic oil is low, add recommended volume.

Check engine air filter element. Change if required.

Check the coolant level. If the coolant level is too low, fill the system.

Check idle engine speed, steering unit, service brakes and parking brake. If you found a problem, fix it.

Oil And Filter Change

Every 200 hours

Change engine oil. Recommended oil - Plus-50, SAE 15W-40, 10W-30, 5W-40. API Service Category CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4. Lubricating system capacity - 2.2 L (0.58 gal). Check engine oil level after replacement.

Change engine oil filter. Oil filter part number: M806418. When change the filter, cleaning the housing is recommended. After replacing the filter, check the oil level. If necessary, add it.

Replace hydraulic/transmission fluid (Hydro Models). Hydraulic/transmission oil type - Low Viscosity Hy-Gard, J20D. How much to change - 13.3 L (3.5 gal). After completing the filling procedure, check hydraulic/transmission oil level.

Hydraulic/transmission fluid filter replacement (Hydro Models). Oil filter part number: LVU800405. After replacing the filter, check the hydraulic/transmission oil level. Add oil if required.

Every 400 hours

Replace hydraulic/transmission fluid (Gear Models). Oil type - Low Viscosity Hy-Gard, J20D. How much to change - 13.5 L (3.6 gal). After completing the filling procedure, check hydraulic/transmission oil level.

Replace hydraulic/transmission filter (Gear Models). Hydraulic/transmission filter part number: LVA802833. After installation, checking the hydraulic/transmission oil level is recommended. If after checking the hydraulic fluid level is low, add it.

Every 500 hours

Replace engine fuel filter. Engine fuel filter part number: CH15553. Check the operation of fuel injection pump.

Change front axle lubricant. Front axle oil - GL-5 Lubricant 80W-90. Front Axle Capacity - 3.4 L (0.90 gal).

Check engine primary air filter elements. Change if necessary. Air filter part number - M113621.

Inspect engine secondary air filter element. Replace as required. Part number - M123378.

Yearly Maintenance

John Deere 4110 replacement parts

Engine Primary Air Filter. Part Number: M113621
Engine Secondary Air Filter. Part Number: M123378
Engine Oil Filter. Part Number: M806418
Engine Fuel Filter. Part Number: CH15553
Transmission/Hydraulic Oil Filter. Part Number: LVA802833 (Gear) / LVU800405 (Hydro)

Replace filter and engine oil. Check and clean the oil system.

Replace engine air filter elements.

Change transmission/hydraulic filter.

Change transmission/hydraulic oil.

Drain water from fuel tank, then replace the fuel filter.

Clean oil cooler fins and radiator.

Drain, flush and refill cooling system. Cooling System Capacity - 2.4 L (0.63 gal).

Check all hoses and clamps.

Check battery electrolyte level.

Check engine valve clearance.

Inspect and adjust fuel injection nozzle.